Abstract:We demonstrate highly efficient Raman distributed feedback (DFB) fibre lasers for the first time with up to 1.6 W of continuous wave (CW) output power. The DFB Bragg gratings are written directly into two types of commercially available passive germano-silica fibres. Two lasers of 30 cm length are pumped with up to 15 W of CW power at 1068 nm. The threshold power is ~2 W for a Raman-DFB (R-DFB) laser written in standard low-NA fibre, and only ~1 W for a laser written in a high-NA fibre, both of which oscillate in a narrow linewidth of <0.01 nm at ~1117 nm and ~1109 nm, respectively. The slope efficiencies are ~74% and ~93% with respect to absorbed pump power in the low-NA fibre and high-NA fibre respectively. Such high conversion efficiency suggests that very little energy is lost in the form of heat through inefficient energy transfer. Our results are supported by numerical simulations, and furthermore open up for the possibility of having narrow linewidth all-fibre laser sources in wavelength bands not traditionally covered by rare-earth doped silica fibres. Simulations also imply that this technology has the potential to produce even shorter R-DFB laser devices at the centimetre-level and with mW-level thresholds, if Bragg gratings formed in fibre materials with higher intrinsic Raman gain coefficient than silica are used. These materials include for example tellurite or chalcogenide glasses. Using glasses like these would also open up the possibility of having narrow linewidth fibre sources with DFB laser oscillating much further into the IR than what currently is possible with rare-earth doped silica glasses.

Ultralong passively mode-locked ring fibre lasers in the femtosecond range assisted by Raman amplification

Real-Time Transition Dynamics of Harmonically Mode-Locked Femtosecond Ultralong Ring Fiber Lasers

Ultrafast Raman fiber laser: a review and prospect

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Environmentally stable Er-fiber mode-locked pulse generation and amplification by spectrally filtered and phase-biased nonlinear amplifying long-loop mirror

Generation of sub-40 fs pulses at 1.8 μm by chirp-assisted Raman scattering in hydrogen-filled hollow-core fibre

All-fiber Ultrafast Laser Generating Gigahertz-Rate Pulses Based on a Hybrid Plasmonic Microfiber Resonator

Microjoule-level mid-infrared femtosecond pulse generation in hollow-core fibres

Femtosecond Red and Near-Infrared Lasers Due to Cascaded-Raman-Assisted Four-Wave Mixing in a Nonlinear Yb-Doped Fiber Amplifier

All Polarization-maintaining Passively Mode-locked Ytterbium-doped Fiber Lasers, Behavior under Two Different Cavity Configurations

All fiber ultrafast laser generating gigahertz pulse based on a hybrid plasmonic microfiber resonator

503Mhz Repetition Rate Femtosecond Yb: Fiber Ring Laser with an Integrated WDM Collimator.

Highly efficient Raman distributed feedback fibre lasers

Fully-integrated dual-wavelength all-fiber source for mode-locked square-shaped mid-IR pulse generation via DFG in PPLN

Nonlinear ultrafast fiber amplifiers beyond the gain-narrowing limit

Femtosecond fiber oscillator based on a 3×3-coupler-NALM: numerical model and realizations at 1 and 2 µm

439 MHz, 94 fs, low-threshold mode-locked all fiber ring laser

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

Environment-stable sub-100 fs Er: fiber laser with a 3 dB bandwidth of 78 nm

Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

Widely tunable sub-30-fs pulses from a compact erbium-doped fiber source