Abstract:With the growing awareness to protect the urban environment and the increasing demand for strategic materials, recycling of postconsumer lithium-ion batteries has become imperative. This study aims to recover lithium, cobalt, nickel, and manganese from a LiNi0.15Mn0.15Co0.70O2 cathode material of spent lithium-ion batteries of an electric vehicle. By utilizing systematic experimental and theoretical approaches based on the design of experiment and response surface methodology, the best leachant between HCl and H2SO4 + H2O2 and the optimal operating conditions are determined. Leaching with 1.0 M H2SO4 mixed with 0.62 wt % H2O2 at a liquid-to-solid ratio of 25.8 mL g–1 and a temperature of 51 °C for 60 min results in ∼100% recovery of all four metals. After leaching, cobalt, nickel, and manganese are coprecipitated as Ni0.15Mn0.15Co0.70(OH)2 at pH above 11, while lithium is precipitated as lithium carbonate. These precipitates are mixed and sintered to generate a new cathode material, which is used to make a battery with high electrochemical performance. Valorization of spent lithium-ion batteries from electric vehicles enables conserving natural resources and protecting ecosystems, both of which enable the long-term sustainability of the biosphere while at the same time contributing to the circular economy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06869?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06869</a>.Additional information on the experimental and statistical methodology and supporting results (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06869/suppl_file/sc0c06869_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Leaching of cathode materials from spent lithium-ion batteries by using a mixture of ascorbic acid and HNO3

Acid-Free Leaching Nickel, Cobalt, Manganese, and Lithium from Spent Lithium-Ion Batteries Using Fe(II) and Fe(III) Solution

Rapid extraction of valuable metals from spent LiNixCoyMn1-x-yO2 cathodes based on synergistic effects between organic acids

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

Leaching Mechanisms of Recycling Valuable Metals from Spent Lithium-Ion Batteries by a Malonic Acid-Based Leaching System

Process for recycling mixed-cathode materials from spent lithium-ion batteries and kinetics of leaching

Leaching Process for the Recovery of Valuable Metals from Spent Lithium-nickel-cobalt-manganese-oxide-based Lithium-ion Batteries

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes

Selective leaching of lithium from mixed spent lithium iron phosphate powder

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Selective recycling of lithium from spent LiNixCoyMn1-x-yO2 cathode via constructing a synergistic leaching environment

Leaching of valuable metals from cathode active materials in spent lithium-ion batteries by levulinic acid and biological approaches

Recycling of mixed lithium-ion battery cathode materials with spent lead-acid battery electrolyte with the assistance of thermodynamic simulations

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Recovery of Lithium, Nickel, Cobalt, and Manganese from Spent Lithium-Ion Batteries Using L-Tartaric Acid As a Leachant

Study of Spent Battery Material Leaching Process

Gluconic Acid Leaching of Spent Lithium-Ion Batteries as an Environmentally Friendly Approach to Achieve High Leaching Efficiencies in the Recycling of NMC Active Material

Leaching Behavior Analysis of Valuable Metals from Lithium-Ion Batteries Cathode Material

Closed-Loop Recycling of Lithium, Cobalt, Nickel, and Manganese from Waste Lithium-Ion Batteries of Electric Vehicles

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

Efficient extraction of valuable metals from spent LiNi0.5Co0.2Mn0.3O2 cathode based on an acid-free leaching process