Abstract:The transient process of a centrifugal pump existed in a variety of occasions. There were a lot of researches in the external characteristic in startup process and stopping process, but internal characteristics were less observed and studied. Study of the internal flow field had significant meanings. The performance of a pump could be evaluated and improved by revealing the flow field. In the other hand, the prediction of external characteristic was based on the correct analysis of the internal flow. In this paper, theoretical method and numerical simulation were used to study the internal characteristic of a centrifugal pump. The theoretical study showed that the relative flow in an impeller was composed of homogeneous flow and axial vortex flow. The vortex intensity was mainly determined by angular velocity of impeller, flow channel width and blade curvature. In order to get the internal flow field and observe the evolution of transient internal flow in the impeller, Computational Fluid Dynamics(CFD) were used to study the three-dimensional unsteady incompressible viscous flows in a centrifugal pump during starting period. The Dynamic Mesh (DM) method with non-conformal grid boundaries was applied to get the external characteristic and internal flow field. The simulate model included three pumps with different blade numbers and the same blade curvature. The relative velocity vector showed that there was a big axial vortex in impeller channel. At the beginning, the vortex was raised in the pressure side of the impeller outlet and with time went on, it shifted to the middle flow channel of the impeller and the vortex intensity increased. When the speed and flow rate reached a definite value, the influence of the axial vortex began to get smaller. The vortex developed faster when the flow channel got narrower. Due to the evolution of axial vortex, the slip factor during starting period was smaller than that in quasi-steady condition. As a result, transient head was lower than quasi-steady head in startup process.

Influence of pump start-up mode on the stability of mixed-flow pumps

Influence of End Wall Clearance on Guide Vane Self-Excited Vibrations at Small Openings during Pump Mode’s Starting Up Process of a Reversible Pump Turbine

Analysis of axial force and pressure pulsation of centrifugal pump as turbine impeller based on dynamic mode decomposition

Transient Internal Characteristic Study of a Centrifugal Pump During Startup Process

Pulsation Stability Analysis of a Prototype Pump-Turbine during Pump Mode Startup: Field Test Observations and Insights

Investigation on the flow and induced-noise mechanism during the transient start-up process of a mixed-flow pump

Study On Transient Hydrodynamic Performance And Cavitation Characteristic Of High-Speed Mixed-Flow Pump

Numerical Study on Transient Performance of Mixed Flow Pump During Starting Period

Study on the Transient Characteristics of Pump During the Starting Process with Assisted Valve

Analysis of Flow Characteristics in Pumped Storage Unit During Start-Up in Turbine Mode

Flow-Induced Vibration of Non-Rotating Structures of a High-Head Pump-Turbine during Start-Up in Turbine Mode

Transient effect analysis of centrifugal pump during rapid starting period

Study on Internal Flow Characteristics and Pressure Pulsation Features of Pump-Turbine under the No-Load Startup Condition with Different Heads

Head-Cover Vibration Investigation of a Prototype Reversible Pump-Turbine Unit During Start-up in Pump Mode. Part I: Fluid Dynamic Analysis

Theoretical Prediction Model of Transient Performance for a Mixed Flow Pump under Fast Start-Up Conditions

The acceleration effect of pump as turbine system during starting period

Research on the Transient Hydraulic Characteristics of Multistage Centrifugal Pump During Start-Up Process

Characteristic Analysis of Pressure Fluctuation of the Super Large Flow and High-Power Centrifugal Pump During Transient Processes of the Start-Up and Shutdown

Experimental and Numerical Study of Transient Flow in a Centrifugal Pump During Startup

Investigations into Hydraulic Instability during the Start-Up Process of a Pump-Turbine under Low-Head Conditions

Influence of Different Valve Openings on the Structural Dynamic Characteristics of a Multistage Pump