Abstract:The transient process of a centrifugal pump existed in a variety of occasions. There were a lot of researches in the external characteristic in startup process and stopping process, but internal characteristics were less observed and studied. Study of the internal flow field had significant meanings. The performance of a pump could be evaluated and improved by revealing the flow field. In the other hand, the prediction of external characteristic was based on the correct analysis of the internal flow. In this paper, theoretical method and numerical simulation were used to study the internal characteristic of a centrifugal pump. The theoretical study showed that the relative flow in an impeller was composed of homogeneous flow and axial vortex flow. The vortex intensity was mainly determined by angular velocity of impeller, flow channel width and blade curvature. In order to get the internal flow field and observe the evolution of transient internal flow in the impeller, Computational Fluid Dynamics(CFD) were used to study the three-dimensional unsteady incompressible viscous flows in a centrifugal pump during starting period. The Dynamic Mesh (DM) method with non-conformal grid boundaries was applied to get the external characteristic and internal flow field. The simulate model included three pumps with different blade numbers and the same blade curvature. The relative velocity vector showed that there was a big axial vortex in impeller channel. At the beginning, the vortex was raised in the pressure side of the impeller outlet and with time went on, it shifted to the middle flow channel of the impeller and the vortex intensity increased. When the speed and flow rate reached a definite value, the influence of the axial vortex began to get smaller. The vortex developed faster when the flow channel got narrower. Due to the evolution of axial vortex, the slip factor during starting period was smaller than that in quasi-steady condition. As a result, transient head was lower than quasi-steady head in startup process.

Characteristic Analysis of Pressure Fluctuation of the Super Large Flow and High-Power Centrifugal Pump During Transient Processes of the Start-Up and Shutdown

Transient Internal Characteristic Study of a Centrifugal Pump During Startup Process

Study on the Transient Characteristics of Pump During the Starting Process with Assisted Valve

Study On Transient Hydrodynamic Performance And Cavitation Characteristic Of High-Speed Mixed-Flow Pump

Numerical Examination of the Dynamic Evolution of Fluctuations in Cavitation and Pressure in a Centrifugal Pump during Startup

Research on the Transient Hydraulic Characteristics of Multistage Centrifugal Pump During Start-Up Process

Numerical Study on Transient Performance of Mixed Flow Pump During Starting Period

Fluid-Structure Coupling Analysis of a Pump-turbine Unit During the Pump Shutdown Transient Process

Numerical Investigation of Flow and Structural Characteristics of a Large High-Head Prototype Pump–Turbine during Turbine Start-Up

Experimental and Numerical Study of Transient Flow in a Centrifugal Pump During Startup

Numerical Simulation of Transient Characteristics of Start-Up Transition Process of Large Vertical Siphon Axial Flow Pump Station

Study on the Transient Characteristics of the Centrifugal Pump during the Startup Period with Assisted Valve

Pressure Fluctuation Characteristics Analysis of Centrifugal Pump as Turbine in Its Start-Up Process

Analysis of Flow Characteristics in Pumped Storage Unit During Start-Up in Turbine Mode

Numerical and field experimental study on the start-up process of a prototype axial-flow pump system considering the motion characteristics of cutoff facilities

Study on Internal Flow Characteristics and Pressure Pulsation Features of Pump-Turbine under the No-Load Startup Condition with Different Heads

Theoretical Model on Transient Performance of a Centrifugal Pump under Start-Up Conditions in Pumped-Storage System

Head-Cover Vibration Investigation of a Prototype Reversible Pump-Turbine Unit During Start-up in Pump Mode. Part I: Fluid Dynamic Analysis

Experimental And Numerical Simulation On The Starting Period Of A Centrifugal Pump

Numerical Simulation of the Transient Flow in A Centrifugal Pump During Starting Period

Transient effect analysis of centrifugal pump during rapid starting period