Abstract:To address the drawbacks of inadequate energy density as well as utilization effectiveness in solar energy utilization, phase change energy storage offers a possible option. However, the low thermal conductivity of traditional phase change materials (PCMs) restricts the extent to which solar energy utilization can be enhanced. In this paper, the impact of the metal foam (MF) on the solid–liquid interface, the flow field, the enhancement heat transfer mechanism during the paraffin wax (PX) melting process and thermal storage characteristics was analyzed. Besides, a three-dimensional mathematical model of MF-PX using the hybrid mesh technique was established and software ANSYS-FLUENT was used for simulation. The results indicated that, the hybrid mesh exhibited a reduction of 52.75 % in mesh count compared to the unstructured mesh, resulting in 45 % reduction in computational time. Moreover, the hybrid mesh also showcased improved mesh quality that the unstructured mesh was mainly distributed in the range of 0.48–0.6, while within the range of 0.84–1.0 for the hybrid mesh. More important, the maximum relative error between experimental and simulation was 8.67 %, indicating that the model can make a reasonable prediction. With the proportions of MF increased from 0.11 % to 0.43 %, both the Rayleigh number (Ra) and its amplification decreased. At 800 s, the Ra decreased from 1.76E+07 to 1.20E+07, while the amplification of the Ra was reduced from 1.88E+07 to 1.30E+07. In addition, the natural convection proportions of CMF decreased from 96.31 % to 80.65 %. These observations indicated that natural convection was the primary heat transfer mechanism, and the conduction was enhanced by the increasing proportion of MF. Finally, in terms of heat storage characteristics, the heat storage capacity and heat storage rate of the composite PCM slightly decreased. The heat storage values decreased from 19.30 kJ to 18.66 kJ. Similarly, the heat storage rates decreased from 19.86 J/s to 18.81 J/s.

An effective thermal conductivity model for the three-phase porous media based on the numerical simulation

Three-dimensional Thermo-Hydro-mechanical Responses of Stratified Saturated Porothermoelastic Material

Three-dimensional effect on the effective thermal conductivity of porous media

Mesoscopic simulations of phase distribution effects on the effective thermal conductivity of microgranular porous media.

The Effective Thermal Conductivity of Unsaturated Porous Media Deduced by Pore-Scale SPH Simulation

Mesoscopic Predictions Of The Effective Thermal Conductivity For Microscale Random Porous Media

Experiment and Numerical Simulation of Effective Thermal Conductivity of Porous Media

Pore-to-meter Scale Modeling of Heat and Mass Transport Applied to Thermal Energy Storage: How Local Thermal and Velocity Fluctuations Affect Average Thermal Dispersivity

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

Numerical Analysis of Effective Thermal Conductivity of Mixed Solid Materials

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Numerical Calculations of Effective Thermal Conductivity of Porous Ceramics by Image-Based Finite Element Method

Numerical Simulation and Theoretical Analysis of Thermal Boundary Characteristics of Convection Heat Transfer in Porous Media

Numerical investigation of vapor–liquid heat and mass transfer in porous media

Three-equation Local Thermal Non-Equilibrium Model for Transient Heat Transfer in Porous Media: the Internal Thermal Conduction Effect in the Solid Phase

Investigation on the Three-Dimensional Multiphase Conjugate Conduction Problem Inside Porous Wick with the Lattice Boltzmann Method

Implementation and validation of effective thermal conductivity model of coal‐rock mass with rough capillary pore structure under CT three‐dimensional reconstruction

Numerical simulation of natural convective heat and mass transfer in porous media

Numerical analysis on heat transfer characteristics of a multi-vapor channel vapor chamber with novel ultra-thin composite wick

NUMERICAL SIMULATION OF FORCED CONVECTION HEAT TRANSFER IN POROUS PLATE CHANNELS USING THERMAL EQUILIBRIUM AND NONTHERMAL EQUILIBRIUM MODELS

Thermal–physical properties of selected geomaterials: coal, sandstone and concrete based on basic series and parallel models