Abstract:Pores, fractures, and mineral compositions in coal have a significant impact on the mechanical properties, seepage characteristics, and water–rock interaction of coal. This paper proposes a method to determine the threshold value of various mineral components and pores inside the coal sample through computed tomography (CT) scanning, X-ray diffractometer (XRD) test and nuclear magnetic resonance (NMR) technology. This method determines the porosity of the coal by NMR, and then determines the pore reconstruction threshold. The type and composition of coal sample minerals were determined by XRD. Combined with the difference in the density of each mineral, the classification threshold of each type of mineral can be determined. We first determined the representative elementary volume through pore and mineral reconstruction of coal with different sizes. It was found that when the edge length of the selected cube is greater than 140 pixels (5 mm) and less than 400 pixels (13.6 mm), the pore threshold is stable. While for the mineral reconstruction, the range of threshold stability is 140 pixels (5 mm) to 580 pixels (20.7 mm). On this basis, we selected three cubes with a side length of 300 pixels and different positions for pore and mineral reconstruction. The reconstruction results show that the coal sample measurement area has pore and mineral composition thresholds of 19804 and 24533, respectively. The pores in coal samples can be divided into connected pores and isolated pores. The equivalent diameter and shape factor of a connected pores are much larger than any isolated pore. The shape of the connected pores is close to a circle or a square. The shapes of isolated pores are close to needles. The threshold values of amorphous, feldspar, quartz, illite and chlorite are 24533, 25740, 25927, 26826 and 28748, respectively. The three-dimensional characterization results show that illite and chlorite are distributed in flakes, and the rest of the minerals are distributed in granular form. The extraction of different mineral components is helpful for the research on the evolution of various minerals before and after water immersion.

Implementation and validation of effective thermal conductivity model of coal‐rock mass with rough capillary pore structure under CT three‐dimensional reconstruction

Determination of the effective thermal conductivity of the porous media based on digital rock physics

Thermal–physical properties of selected geomaterials: coal, sandstone and concrete based on basic series and parallel models

Computational model for the thermal conductivity of soil-rock mixture

Damage characteristics of coal under different loading modes based on CT three-dimensional reconstruction

3D reconstruction of coal pore network and its application in CO2-ECBM process simulation at laboratory scale

Representative elementary volume evaluation of coal microstructure based on CT 3D reconstruction

Study on seepage and deformation characteristics of coal microstructure by 3D reconstruction of CT images at high temperatures

Reconstruction of 3D Micro Pore Structure of Coal and Simulation of Its Mechanical Properties

Thermo-mechanical coupling numerical simulation method under high temperature heterogeneous rock and application in underground coal gasification

An effective thermal conductivity model for the three-phase porous media based on the numerical simulation

Simulation of coal microstructure characteristics under temperature-pressure coupling based on micro-computer tomography

Measurement of Thermophysical Properties of Loose Coal Based on Multi-dimensional Constant Temperature Boundary Unsteady Heat Transfer Model

Model Test on Temperature Distribution in Metro Tunnel Surrounding Rock and Inverse Calculation of Its Thermal Conductivity

Scale Effect of Coal Porosity and Permeability Characteristics Based on CT 3D Reconstruction from a Microperspective

A NUMERICAL MODEL FOR THERMAL CONDUCTIVITY OF SOFT SOILS BASED ON MESOSCOPIC SIMULATION

A composite element solution of convection-conduction heat transfer in fractured rock mass

Accurate characterization of coal pore and fissure structure based on CT 3D reconstruction and NMR

Semi-homogeneous model of coal based on 3D reconstruction of CT images and its seepage-deformation characteristics

Thermal imaging identification of coal and rock in northern China under thermal excitation——experiment and theoretical model

Accurate characterization method of pores and various minerals in coal based on CT scanning