Abstract:The thermal boundary characteristics at the contact interface between a porous media and an impermeable wall subject to a constant heat flux on its upper surface with and without consideration of the thermal contact resistance were investigated using a particle-level numerical simulation of single phase fluid flow and convection heat transfer in porous media. The numerical simulations assumed an ideal packed bed (simple cubic structure) formed by uniform diameter particles with small contact areas and a zero- or finite-thickness wall subject to a constant heat flux at the surface which mirrors the experimental setup. The numerical simulations showed that the temperature distribution at the contact interface is non-uniform for the porous media with a zero-thickness impermeable wall, and in the porous media with a finite-thickness impermeable wall with a thermal contact resistance between the particles and the plate (such as with a non-sintered porous media) with a constant heat flux on the outer surface, while the heat flux distribution at the contact interface is quite uniform for these cases. However, in the porous media with a finite-thickness impermeable wall without a thermal contact resistance between the particles and the plate (such as with a sintered porous media) with a constant heat flux on the outer surface, the heat flux distribution at the contact interface is very non-uniform, while the temperature distribution at the contact interface is quite uniform. Numerical simulations of the thermal boundary characteristics of the convection heat transfer in the porous media were used to investigate the applicability of various boundary conditions for the energy equations with and without a thermal contact resistance between the particles and the plate wall.

NUMERICAL SIMULATION OF FORCED CONVECTION HEAT TRANSFER IN POROUS PLATE CHANNELS USING THERMAL EQUILIBRIUM AND NONTHERMAL EQUILIBRIUM MODELS

Forced Convective Heat Transfer in a Plate Channel Filled with Solid Particles

Numerical Simulation of Gases over Flat Plate Using Two-Temperature Nonlinear Coupled Constitutive Relations

Numerical investigation of forced convection heat transfer in porous media using a thermal non-equilibrium model

Forced Convection Heat Transfer in Plate Channels Filled with Packed Beds or Sintered Porous Media

Effect Of Particle Diameter On Forced Convective Heat Transfer In A Channel Filled With Solid Particles Using A Non-Thermal Equilibrium Model

Forced Convective H Eat Transfer in a Plate C Hannel Filled with Solid Particles

Numerical Simulation of Fluid Flow and Convection Heat Transfer in Sintered Porous Plate Channels

Experimental and Numerical Investigation of Forced Convection Heat Transfer of Air in Non-Sintered Porous Media

Forced Convective Heat Transfer in a Porous Plate Channel

Boundary conditions and wall effect for forced convection heat transfer in sintered porous plate channels

Numerical Simulation and Theoretical Analysis of Thermal Boundary Characteristics of Convection Heat Transfer in Porous Media

Fluid Flow and Conjugate Heat Transfer in a Channel with Inflow from a Porous Wall

Analytical and Numerical Study on Thermally Developing Forced Convective Flow in a Channel Filled with a Highly Porous Medium Under Local Thermal Non-Equilibrium

Forced Convective Heat-Transfer in A Vertical Annulus Filled with Porous-Media

Numerical study on mixed convection heat transfer of copper-water nanofluid in a porous cavity with an isothermal solid block in local thermal non-equilibrium

Numerical investigation of vapor–liquid heat and mass transfer in porous media

NUMERICAL INVESTIGATION ON THE EFFECTS OF VISCOUS DISSIPATION AND VARIABLE THERMO-PHYSICAL PROPERTIES ON FORCED CONVEC-TION HEAT TRANSFER IN POROUS MEDIA

Computational Simulation of Magneto Convection Flow of Williamson Hybrid Nanofluid with Thermal Radiation Effect

NUMERICAL INVESTIGATION ON TRANSPIRATION COOLING BASED ON LOCAL THERMAL NON-EQUILIBRIUM MODEL

Numerical simulation of natural convective heat and mass transfer in porous media