Abstract:This article presents a sustainable method for the catalytic reduction of both simple and binary dye systems using magnetic activated carbon (Fe 3 O 4 @AC) synthesized from almond shells, an agricultural waste biomass. The reduction of methylene blue (MB) and Congo red (CR) was investigated in the presence of NaBH 4 , and a series of physical-chemical experiments were conducted to elucidate the mechanism of dye conversion and its performance. The results confirmed the successful synthesis of Fe 3 O 4 nanoparticles on the activated carbon surface. The calculated rate constants in a simple system were 0.34 min− 1 for MB and 0.25 min− 1 for CR, in the binary system, the Fe 3 O 4 @AC catalyst demonstrated enhanced selectivity for the cationic MB dye, attributable to the robust, attractive surface charge. The study aimed to enhance catalytic performance by employing optimization curves generated from a three-level Box-Behnken Design (BBD) simulation. Experimental results indicated that the optimal catalyst dose, dye concentration, and reaction duration were 4–7 mg, 80–120 mg/L, and 5–20 min, respectively. Response surface methodology (RSM) was developed by processing the findings from 17 replicated experiments using a two-quadratic polynomial model, establishing a functional link between the experimental parameters and MB conversion. Optimal conditions for MB conversion were determined to be 7 mg of catalyst, 80 mg/L of MB concentration, and a reaction time of 12.5 minutes, resulting in an estimated conversion rate of 99.99 %. This prediction was validated by experimental findings, with regression analysis confirming a high correlation (R 2 > 0.99) between the predicted and observed values. Additionally, the Fe 3 O 4 @AC catalyst demonstrated good recyclability and stable performance over three consecutive cycles, maintaining high conversion efficiency without loss of performance. These findings demonstrate that Fe 3 O 4 @AC is a viable approach for the rapid and efficient remediation of dyes in water.

Synthesis of magnetic carbon composite by diesel engine and its application to dye removal

Synthesis and Properties of Magnetic Fe3O4-activated Carbon Nanocomposite Particles for Dye Removal

Magnetic Fe-doping G-C3n4/graphite: the Effect of Supporters and the Performance in Fenton-like Reactions

General synthesis of magnetic mesoporous FeNi/graphitic carbon nanocomposites and their application for dye adsorption

Fabrication of magnetically responsive HKUST-1/Fe3O4 composites by dry gel conversion for deep desulfurization and denitrogenation

Polydopamine-modification of a magnetic composite constructed from citric acid–cross-linked cyclodextrin and graphene oxide for dye removal from waters

Magnetic powder MnO-Fe2O3 composite--a novel material for the removal of azo-dye from water.

One-dimensional Magnetic Chains for Methylene Blue Removal

Cellulose-supported magnetic Fe3O4–MOF composites for enhanced dye removal application

Preparation and Characterization of Diesel Fuel-Based Magnetic Fluids

Preparation and characterization of magnetic porous carbon microspheres for removal of methylene blue by a heterogeneous Fenton reaction.

Facile preparation and application of magnetic chitosan/fly ash composite as a hybrid biosorbent for the effective removal of direct dyes

In-situ one-pot synthesis, characterization of magnetic hydrochar and its application as Fenton-like catalyst for the degradation of methylene blue dye

Synthesis Of Magnetic Microspheres With Sodium Alginate And Activated Carbon For Removal Of Methylene Blue

Fe3O4@C Core-Shell Carbon Hybrid Materials as Magnetically Separable Adsorbents for the Removal of Dibenzothiophene in Fuels

Highly Efficient Removal Methyl Blue from Aqueous Solution Using a Novel Nitrogen-Doped Porous Magnetic Carbon

Optimizing catalytic performance: Reduction of organic dyes using synthesized Fe 3 O 4 @AC magnetic nano-catalyst

Yolk-shell Co3 O4 @fe3 O4 /C Nanocomposites As a Heterogeneous Fenton-like Catalyst for Organic Dye Removal.

Mechanical Grinding of FeNC Nanomaterial with Fe3O4 to Construct Magnetic Adsorbents for Desulfurization

Synthesis and characterization of a novel ternary magnetic composite for the enhanced adsorption capacity to remove organic dyes

Novel and High-Performance Magnetic Carbon Composite Prepared from Waste Hydrochar for Dye Removal