Mechanical Grinding of FeNC Nanomaterial with Fe3O4 to Construct Magnetic Adsorbents for Desulfurization

Chunxia Wang,Wenyi Lu,Wenjie Wu,Lifu Zhang,Wenxuan Guo,Guoyong Huang,Shengming Xu

DOI: https://doi.org/10.1016/j.seppur.2022.122574

IF: 8.6

2023-01-01

Separation and Purification Technology

Abstract:Herein, a series of 3D nitrogen doped porous carbon nanomaterials (FeNC) at different pyrolysis temperature were prepared, followed by a mechanical grinding method to construct magnetically nanocomposite (FeNC/ Fe3O4) which was demonstrated for the desulfurization of dibenzothiophene (DBT) in model oils. The FeNC derived from the pyrolysis of iron salt and nitrogen-doped carbon precursors possess abundant porous structure, which is highly active in the physical adsorption of aromatic sulfur derivatives. Impressively, the as-prepared FeNC-700 are evidenced to yield an excellent desulfurization efficiency (95.1% for 200 ppmw), a remarkable estimated adsorption capacity (25.08 mg S/g for 200 ppmw), and a high selectivity for DBT. Theoretical calculation revealed that the adsorption behaviors towards DBT followed the pseudo-second-order kinetic model, displays a better fitting coefficient based on Langmuir isotherm equation. The thermodynamics results indicate that adsorption process over FeNC-700 was spontaneous and exothermic reaction since Delta G, Delta H, Delta S, all shows negative signs. Subsequently, the FeNC-700 was mechanically mixed with 20 nm Fe3O4 to produce magnetically nanocomposite (FeNC-700/Fe3O4) for the adsorption of DBT in a simple separation process by external field and can be regenerated five runs without significant weight loss. Therefore, this strategy greatly simplifies the experimental procedure and favors the regeneration of the adsorbents.