Abstract:The development of perovskite solar cells (PSCs) has progressed rapidly because of their high efficiency and low cost. The performance of PSCs is predominantly determined by the quality of the perovskite films, which is controlled by the fabrication process. The comprehensive and in-depth understanding of the nucleation, crystallization, and growth process are imperative for the further advancement of large-scale manufacturing of high-quality perovskite films. In this work, the simple process parameters of perovskite thin films were systematically optimized at ambient air, such as containing the thickness of the perovskite thin film, the anti-solvent bath, and the thermal annealing time. Through these simple processes, the wet film, solvent volatilization, and crystallization of perovskite films can be controlled and optimized. After optimizing the spraying conditions, the champion power conversion efficiency (PCE) of the PSCs achieved 20.6% (reverse scan) and had little hysteresis in the current density–voltage (J–V). In addition, the unsealed device retained 85% of its original PCE and showed excellent long-term stability after 650 h of storage in the drying tower.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01129?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01129</a>.VTFL equation for SCLC, SCLC curves of spray-coated perovskite films with different thicknesses, microscopic pictures of perovskite films prepared based on different solvent ratios of DMF to NMP and different anti-solvents, optical photos of perovskite films prepared based on different solvent ratios of DMF to NMP and different anti-solvents, top view of AFM images for the spray-coated perovskite film of different anti-solvent processing times, J–V curves of 1 cm2 PSC on the rigid substrate prepared by the ultrasonic spraying method, and the PCE distribution histogram of rigid PSCs based on 18 devices (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01129/suppl_file/ae0c01129_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Additive Engineering in Spray Enables Efficient Methylammonium-Free Wide-Bandgap Perovskite Solar Cells

Binary Additive Engineering Enables Efficient Perovskite Solar Cells via Spray-Coating in Air

Synergistic Effect of Ammonium Salts in Sequential Deposition toward Efficient Wide-Band-Gap Perovskite Photovoltaics with PCE Exceeding 20%

Low‐Dimensional 2‐thiopheneethylammonium Lead Halide Capping Layer Enables Efficient Single‐Junction Methylamine‐Free Wide‐Bandgap and Tandem Perovskite Solar Cells

Efficient and Stable Wide‐Bandgap Methylammonium‐Free Perovskite Solar Cells by Simultaneous Passivation and Cleaning with Diamine

High Efficiency over 20% of Perovskite Solar Cells by Spray Coating via a Simple Process

Synergetic Effect on Enhanced Photovoltaic Performance of Spray-Coated Perovskite Solar Cells Enabled by Additive Doping and Antisolvent Additive Spraying Treatment

Interfacial modification engineering for efficient and stable MA-free wide-bandgap perovskite solar cells by grain regrowth

Synergetic Regulation of Oriented Crystallization and Interfacial Passivation Enables 19.1% Efficient Wide‐Bandgap Perovskite Solar Cells

Enhanced Efficiency and Intrinsic Stability of Wide-Bandgap Perovskite Solar Cells through Dimethylamine-Based Cation Engineering

Ionic Additive Engineering Toward High‐Efficiency Perovskite Solar Cells with Reduced Grain Boundaries and Trap Density

Suppressing charge recombination in a methylammonium-free wide-bandgap perovskite film for high-performance and stable perovskite solar cells

Fully Spray-Coated Perovskite Solar Minimodules via a Vacuum-Flash Assisted Solution Process

Grain Boundary Chemical Anchoring via Bidirectional Active Site Additive Enables Efficient and Stable Perovskite Solar Cells

Highly Efficient and Stable Wide-Bandgap Perovskite Solar Cells Via Strain Management

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Crystallization control of air-processed wide-bandgap perovskite for carbon-based perovskite solar cells with 17.69% efficiency

Chloride‐Based Additive Engineering For Efficient and Stable Wide‐Bandgap Perovskite Solar Cells

High-Performance Perovskite Solar Cells Fabricated by a Hybrid Physical–Chemical Vapor Deposition

Phase-Stable Wide-Bandgap Perovskites for Four-Terminal Perovskite/Silicon Tandem Solar Cells with over 30% Efficiency.

Progress in Spray Coated Perovskite Films for Solar Cell Applications