Abstract:Organic–inorganic metal halide perovskite materials have been widely studied as the light absorber for efficient photovoltaics. However, perovskite layers with defective nature are typically prepared with an uncontrollable crystallization process, intrinsically limiting further advance in device performance, and thus require delicate manipulation of crystallization processes and defect density. Here, we demonstrate an ammonium-assisted crystallization of perovskite absorbers during a two-step deposition to fabricate efficient solar cells. Addition of ammonium iodide (NH4I) is devised to manipulate the nucleation and crystal growth of perovskite, wherein the formation and transition of intermediate x[NH4+]•[PbI3]x− enables high-quality perovskite layers with an enlarged grain and reduced defect density. As a result, the perovskite solar cells (PSCs) achieve an average efficiency of 21.36% with a champion efficiency of 22.15% and improved environmental stability over 30 days in ambient conditions with varied relative humidity. These results with addition of NH4I provide an available and ingenious way to construct high-quality perovskite layers for efficient solar cells and will advance the commercial application of perovskite-based photovoltaics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05903?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05903</a>.Experiment method; (Figure S1) SEM images, (Figure S3) absorption, (Figure S4) PL and TRPL of the perovskite layer with different concentrations of NH4I; (Figure S2) XRD and SEM images of PbI2 with or without NH4I; (Figure S5 and Table S1) photovoltaic parameter distribution of PSCs with different concentrations of NH4I; (Figure S6) PCE distribution and MPP tracking of PSCs with and without NH4I addition; (Figure S7 and Table S2) photovoltaic parameter distribution of PSCs with NH4I added on different functional layers; (Figure S8) fitted dark J–V; and (Table S3) fitted parameters of EIS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05903/suppl_file/am1c05903_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synergistic Effect of Ammonium Salts in Sequential Deposition toward Efficient Wide-Band-Gap Perovskite Photovoltaics with PCE Exceeding 20%

Wide-Gap Perovskite Via Synergetic Surface Passivation and Its Application Toward Efficient Stacked Tandem Photovoltaics.

Manipulated Crystallization and Passivated Defects for Efficient Perovskite Solar Cells via Addition of Ammonium Iodide

Additive Engineering in Spray Enables Efficient Methylammonium-Free Wide-Bandgap Perovskite Solar Cells

Crystallization Regulation and Defect Passivation for Efficient Inverted Wide‐Bandgap Perovskite Solar Cells with over 21% Efficiency

Synergetic Regulation of Oriented Crystallization and Interfacial Passivation Enables 19.1% Efficient Wide‐Bandgap Perovskite Solar Cells

Enhanced Efficiency and Intrinsic Stability of Wide-Bandgap Perovskite Solar Cells through Dimethylamine-Based Cation Engineering

Synergic Solventing-out Crystallization with Subsequent Time-Delay Thermal Annealing of PbI2 Precursor in Mesostructured Perovskite Solar Cells

Stable perovskite solar cells with 25.17% efficiency enabled by improving crystallization and passivating defects synergistically

Structure engineering of hierarchical layered perovskite interface for efficient and stable wide bandgap photovoltaics

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

Heterojunction formed via 3D-to-2D perovskite conversion for photostable wide-bandgap perovskite solar cells

Efficient Perovskite Solar Cells Fabricated Through CsCl-Enhanced PbI2 Precursor Via Sequential Deposition.

Molecule Anchoring Strategy Promotes Vertically Homogeneous Crystallization and Aligned Interfaces for Efficient Pb–Sn Perovskite Solar Cells and Tandem Device

Efficient and Stable Wide‐Bandgap Methylammonium‐Free Perovskite Solar Cells by Simultaneous Passivation and Cleaning with Diamine

Grain Boundary Chemical Anchoring via Bidirectional Active Site Additive Enables Efficient and Stable Perovskite Solar Cells

Amide‐Catalyzed Phase‐Selective Crystallization Reduces Defect Density in Wide‐Bandgap Perovskites

Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics

Suppressing Phase Segregation in Wide Bandgap Perovskites for Monolithic Perovskite/Organic Tandem Solar Cells with Reduced Voltage Loss

Suppressing halide phase segregation in wide-bandgap perovskite film by co-doping strategy for high-performance and stable perovskite solar cells

Phase-Stable Wide-Bandgap Perovskites for Four-Terminal Perovskite/Silicon Tandem Solar Cells with over 30% Efficiency.