Abstract:To improve the flexibility, processability, and decomposability of isosorbide (ISB) based polycarbonate, ethoxylated isosorbide (EI5) was used as a comonomer in the synthesis process. Structures and compositions of the ISB/EI5‐based polycarbonate were controlled by varying the feeding molar ratio of ISB and EI5. With increasing EI5 content, the mechanical flexibility and thermal processability of ISB/EI5‐based polycarbonate were improved. Hydrophilicity improved with the increase in EI5 content, resulting in hydrolytic degradability when the EI5 ratio was above 10 mol%. Synthesis of polycarbonates (PCs) from isosorbide (ISB) monomers has been recently investigated. However, compared to bisphenol A, PCs face challenges in commercialization because their high rigidity renders it difficult to increase their molecular weight, resulting in high brittleness. To address these limitations, a flexible co‐monomer, ethoxylated ISB (EI5), was mixed with ISB to produce ISB/EI5‐based PCs. The structures of the ISB/EI5‐based PCs were controlled by varying the ISB/EI5 ratio from 100/0 to 60/40 mol%. Films were fabricated, and their thermal, optical, and mechanical properties and degradability were investigated. With increasing EI5 content, the thermal processability of the ISB/EI5‐based PCs improved, and the produced films exhibited excellent visible light transmittance and UV‐blocking effects. The mechanical properties of the ISB/EI5‐based PCs indicated sufficient tensile strength (σ = 89.7–72.9 MPa), competitive to that of commercial PC, and the properties could be controlled by adjusting the ISB/EI5 ratio. The contact angle and hydrolysis behavior of the ISB/EI5‐based PC films indicated increased surface hydrophilicity and increased degradation rate with increasing EI5 content. In conclusion, the structural control of the ISB/EI5‐based PCs enhanced their moldability and degradability, suggesting their potential commercial utilization.

Influence of Polyol Impurities on Transesterification Kinetics, Molecular Structures and Properties of Isosorbide Polycarbonate

Effect of Catalyst on the Molecular Structure and Thermal Properties of Isosorbide Polycarbonates

SYNTHESIS OF AROMATIC POLYESTERS FROM ESTERS OF DIPHENOLIC ACID AND ISOPHTHALOYL CHLORIDE BY INTERFACIAL POLYCONDENSATION

Study on ester-amide exchange reaction between PBS and PA6IcoT

Mechanism Study on Synthesis of Biobased Polycarbonate from Diphenyl Carbonate and Isosorbide with Metal-Free Catalysts by Identifying Reactivity of Endo-Oh and Exo-Oh

Reactive Blending of Isosorbide-Based Polycarbonates: Catalytic Selectivity and Transesterification Mechanism

Synthesis and Characterization of Photocrosslinked Biobased Polyester Membrane

Design and synthesis of isosorbide‐based copolycarbonates with high transparency and low hygroscopicity for optical applications

Studies on Isosorbide-enhanced Biodegradable Poly(ethylene Succinate)

Synthesis and alkaline hydrolytic degradation of isosorbide‐based polycarbonates via incorporation of ethoxylated isosorbide as a comonomer

High-Molecular-Weight Biobased Polycarbonate Preparation Using Metal-Free Deep Eutectic Solvents: Efficient Activation of the Hydroxyl Groups

Mechanism and Kinetics of Polycarbonate Synthesized from Isosorbide: Identification on the Reactivity of Terminal Groups

Alkali Metal/Quaternary Ammonium Salt Synergistic Catalytic System for the Efficient Synthesis of Biobased Poly(Isosorbide Carbonate)

Characterization and ammonolysis behavior of poly(isosorbide carbonate)-based copolymers

Reactive Blending of Bisphenol-a Polycarbonate with Isosorbide-Based Polycarbonates: Effect of Chain Flexibility and Compatibility

Relationship between Composition and Environmental Degradation of Poly(isosorbide- co -diol oxalate) (PISOX) Copolyesters

Design and Synthesis of Optical Biobased Polycarbonates with High Refractive Index and Low Birefringence

Studies on synthesis and optical properties of poly(isosorbide-co-1,4-cyclohexanedimethanol) carbonate

Unveiling the Role of Key Parameters During Molecular Growth for Optimal Poly(glycerol Sebacate) Synthesis

Balancing the transesterification reactivity of isosorbide with diphenyl carbonate: preferential activation ofexo-OH

Implementing Plant-Derived Isosorbide And Isomannide As Comonomers For Polyester Synthesis: Effects Of Crystallization Properties On Optical Properties