Abstract:To improve the flexibility, processability, and decomposability of isosorbide (ISB) based polycarbonate, ethoxylated isosorbide (EI5) was used as a comonomer in the synthesis process. Structures and compositions of the ISB/EI5‐based polycarbonate were controlled by varying the feeding molar ratio of ISB and EI5. With increasing EI5 content, the mechanical flexibility and thermal processability of ISB/EI5‐based polycarbonate were improved. Hydrophilicity improved with the increase in EI5 content, resulting in hydrolytic degradability when the EI5 ratio was above 10 mol%. Synthesis of polycarbonates (PCs) from isosorbide (ISB) monomers has been recently investigated. However, compared to bisphenol A, PCs face challenges in commercialization because their high rigidity renders it difficult to increase their molecular weight, resulting in high brittleness. To address these limitations, a flexible co‐monomer, ethoxylated ISB (EI5), was mixed with ISB to produce ISB/EI5‐based PCs. The structures of the ISB/EI5‐based PCs were controlled by varying the ISB/EI5 ratio from 100/0 to 60/40 mol%. Films were fabricated, and their thermal, optical, and mechanical properties and degradability were investigated. With increasing EI5 content, the thermal processability of the ISB/EI5‐based PCs improved, and the produced films exhibited excellent visible light transmittance and UV‐blocking effects. The mechanical properties of the ISB/EI5‐based PCs indicated sufficient tensile strength (σ = 89.7–72.9 MPa), competitive to that of commercial PC, and the properties could be controlled by adjusting the ISB/EI5 ratio. The contact angle and hydrolysis behavior of the ISB/EI5‐based PC films indicated increased surface hydrophilicity and increased degradation rate with increasing EI5 content. In conclusion, the structural control of the ISB/EI5‐based PCs enhanced their moldability and degradability, suggesting their potential commercial utilization.

Studies on synthesis and optical properties of poly(isosorbide-co-1,4-cyclohexanedimethanol) carbonate

Colorless Transparent Cyclobutanediol-Based Copolyesters with Excellent Polymerization Robustness, Thermal Stability, and High Performance

Stereoregular Poly(Cyclohexene Carbonate)S: Unique Crystallization Behavior

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Alternating Copolymerization of Epoxides and Isothiocyanates to Diverse Functional Polythioimidocarbonates and Related Block Polymers

Highly Selective Synthesis Of Co2 Copolymer From Styrene Oxide

Isomorphic crystallization of aliphatic copolyesters derived from 1,6-hexanediol: Effect of the chemical structure of comonomer units on the extent of cocrystallization

Effect of Catalyst on the Molecular Structure and Thermal Properties of Isosorbide Polycarbonates

Crystalline CO2 copolymer from epichlorohydrin via Co(III)-complex-mediated stereospecific polymerization

Design and synthesis of isosorbide‐based copolycarbonates with high transparency and low hygroscopicity for optical applications

Cobalt(III)‐complex‐mediated Terpolymerization of CO2, Styrene Oxide, and Epoxides with an Electron‐donating Group

Viscoelastic properties of copolycarbonates comprising isosorbide and 1,4-cyclohexanedimethanol

Synthesis and optical properties of co-polycarbonate containing Cardo structure and binaphthalene structure

Synthesis and alkaline hydrolytic degradation of isosorbide‐based polycarbonates via incorporation of ethoxylated isosorbide as a comonomer

A Synthetic Strategy Toward Isosorbide Polycarbonate with a High Molecular Weight: the Effect of Intermolecular Hydrogen Bonding Between Isosorbide and Metal Chlorides

Functional poly(carbonate-co-ether) synthesis from glycidyl methacrylate/CO2 copolymerization catalyzed by Zn–Co(III) double metal cyanide complex catalyst

Study of Preparation and Properties of Stereoregular Poly(cyclohexenylene carbonate)

Efficient synthesis of isosorbide-based polycarbonate with scalable dicationic ionic liquid catalysts by balancing the reactivity of the endo -OH and exo -OH

Efficient and Scalable Synthesis of CO2‐Based Polycarbonate Diols With Difunctional Initiator and Proton Exchange Agent

Aliphatic Polycarbonates With Controlled Quantities Of D-Xylofuranose In The Main Chain

Effect of the cyclic structure content on aliphatic polycarbonate-based polyurethane