Abstract:To improve the flexibility, processability, and decomposability of isosorbide (ISB) based polycarbonate, ethoxylated isosorbide (EI5) was used as a comonomer in the synthesis process. Structures and compositions of the ISB/EI5‐based polycarbonate were controlled by varying the feeding molar ratio of ISB and EI5. With increasing EI5 content, the mechanical flexibility and thermal processability of ISB/EI5‐based polycarbonate were improved. Hydrophilicity improved with the increase in EI5 content, resulting in hydrolytic degradability when the EI5 ratio was above 10 mol%. Synthesis of polycarbonates (PCs) from isosorbide (ISB) monomers has been recently investigated. However, compared to bisphenol A, PCs face challenges in commercialization because their high rigidity renders it difficult to increase their molecular weight, resulting in high brittleness. To address these limitations, a flexible co‐monomer, ethoxylated ISB (EI5), was mixed with ISB to produce ISB/EI5‐based PCs. The structures of the ISB/EI5‐based PCs were controlled by varying the ISB/EI5 ratio from 100/0 to 60/40 mol%. Films were fabricated, and their thermal, optical, and mechanical properties and degradability were investigated. With increasing EI5 content, the thermal processability of the ISB/EI5‐based PCs improved, and the produced films exhibited excellent visible light transmittance and UV‐blocking effects. The mechanical properties of the ISB/EI5‐based PCs indicated sufficient tensile strength (σ = 89.7–72.9 MPa), competitive to that of commercial PC, and the properties could be controlled by adjusting the ISB/EI5 ratio. The contact angle and hydrolysis behavior of the ISB/EI5‐based PC films indicated increased surface hydrophilicity and increased degradation rate with increasing EI5 content. In conclusion, the structural control of the ISB/EI5‐based PCs enhanced their moldability and degradability, suggesting their potential commercial utilization.

High-Molecular-Weight Biobased Polycarbonate Preparation Using Metal-Free Deep Eutectic Solvents: Efficient Activation of the Hydroxyl Groups

Alkali Metal/Quaternary Ammonium Salt Synergistic Catalytic System for the Efficient Synthesis of Biobased Poly(Isosorbide Carbonate)

Mechanism Study on Synthesis of Biobased Polycarbonate from Diphenyl Carbonate and Isosorbide with Metal-Free Catalysts by Identifying Reactivity of Endo-Oh and Exo-Oh

Pinwheel-Shaped Tetranuclear Organoboron Catalysts for Perfectly Alternating Copolymerization of CO2 and Epichlorohydrin.

Effect of Catalyst on the Molecular Structure and Thermal Properties of Isosorbide Polycarbonates

Reactive Blending of Isosorbide-Based Polycarbonates: Catalytic Selectivity and Transesterification Mechanism

A paradigm for the efficient synthesis of bio-based polycarbonate with deep eutectic solvents as catalysts by inhibiting the degradation of molecular chains

Synthesis and Characterization of Photocrosslinked Biobased Polyester Membrane

Design and Synthesis of Optical Biobased Polycarbonates with High Refractive Index and Low Birefringence

Design and synthesis of isosorbide‐based copolycarbonates with high transparency and low hygroscopicity for optical applications

Preparation of dual active site ionic liquids and their application in catalytic synthesis of poly (isosorbide carbonates)

Influence of Polyol Impurities on Transesterification Kinetics, Molecular Structures and Properties of Isosorbide Polycarbonate

Catalyst-free synthesis of polyesters via conventional melt polycondensation

Modulating H‐bond Strength to Enhance Reactivity for Efficient Synthesis of Cyclic Carbonates with Tetrabutylammonium Iodide‐based Deep Eutectic Solvents

Synthesis of bio-based polycarbonate via one-step melt polycondensation of isosorbide and dimethyl carbonate by dual site-functionalized ionic liquid catalysts

A Synthetic Strategy Toward Isosorbide Polycarbonate with a High Molecular Weight: the Effect of Intermolecular Hydrogen Bonding Between Isosorbide and Metal Chlorides

Enhanced Activity for Producing CO2-based Polyols Enabled by Zn-Co DMC/c-CTA Catalytic System

Synthesis and alkaline hydrolytic degradation of isosorbide‐based polycarbonates via incorporation of ethoxylated isosorbide as a comonomer

Efficient and Scalable Synthesis of CO2‐Based Polycarbonate Diols With Difunctional Initiator and Proton Exchange Agent

Electron-enriched Supramolecular PDI-SiO2 Promoting PDS Activation for Enhanced Photocatalytic Advanced Oxidation

Mechanism and Kinetics of Polycarbonate Synthesized from Isosorbide: Identification on the Reactivity of Terminal Groups