Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Comparative Study on Mechanical Properties and Crashing Characteristics of Granite After Real-Time High-Temperature and Natural-Cooling

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Experimental Study on the Influence of Real-Time Temperature Cycling on Physical and Mechanical Properties of Granite

Study on the Evolution of Physical Parameters and Dynamic Compression Mechanical Properties of Granite after Different Heating and Cooling Cycles

Experimental Research on the Mechanical Properties of Heated Granite after Rapid Cooling

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Effect of high temperature on the brittleness index of granite: an experimental investigation

Influence of Cooling Speed on the Physical and Mechanical Properties of Granite in Geothermal‐related Engineering

Mechanical Characteristics of Granite After Heating and Water-Cooling Cycles

Investigation of the fracture characteristics of granite and green sandstone under different thermal treatments

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Study on the failure mechanism of high-temperature granite under two cooling modes

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

Research on the Impact Mechanical Properties of Real-Time High-Temperature Granite and a Coupled Thermal-Mechanical Constitutive Model

Impacts of different cooling methods on the dynamic tensile properties of thermal-treated granite