Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Cyclic response of stereoscopic geogrid–sand interface under static and cyclic loading

Test and DEM study on cyclic hysteresis characteristics of stereoscopic geogrid–soil interface

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Cyclic and post-cyclic direct shear behaviors of geogrid-sand interface with different soil densities

Particle size effects on coarse soil-geogrid interface response in cyclic and post-cyclic direct shear tests

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Dynamic Shear Behavior of Interface for Clay Reinforced with Geogrid Encapsulated in Thin Layers of Sand

Analysis of cyclic shear characteristics of reinforced soil interfaces under cyclic loading and unloading

Cyclic and post-cyclic shear behavior of sand-geogrid interface under different shear rates

Effect of aperture ratio on the cyclic shear behaviour of aggregate-geogrid interfaces

Behaviour Evaluation of a Gravelly Soil-Geogrid Interface under Normal Cyclic Loading

Influence of soil particle size on monotonic and cyclic direct shear behaviors of geogrid-soil interface

Particle shape effects on the cyclic shear behaviour of the soil–geogrid interface

Effect of Drained Static Shear on Cyclic Deformation Behavior of K-0-consolidated Sand

Effect of Particle Regularity on the Bidirectional Cyclic Shear Behavior of Geogrid–Granular Material Interface

Effect of Particle-Size Gradation on Coarse Sand-Geotextile Interface Response in Cyclic and Postcyclic Direct Shear Test

Effect of particle regularity on the shear response of geogrid-granular material interface under cyclic normal loading

Effects of direct shear characteristics of sand-geogrid interface under different aperture ratios