Abstract:Rising concentration of anthropogenic CO2 in the atmosphere and oceans challenges the ecological balance of Earth. The rising availability of green electricity from renewable energy resources presents a unique opportunity to remove and store CO2 as durable solid carbonates by utilizing Mg- and Ca-rich seawater and electrochemistry. Nonetheless, the design of electrochemical systems and product selectivity remain unresolved challenges in maximizing the potential of this pathway. Herein, we developed an electrochemical approach that operates sequentially in two modes to selectively precipitate magnesium hydroxide and calcium carbonate under ambient conditions. The yields of Mg(OH)2 and CaCO3 using titanium mesh electrodes at applied potentials of −2.5 V versus Ag/AgCl are as high as 87% and 90%, in the absence and presence of CO2 in the gas phase, respectively. The purities of Mg(OH)2 and CaCO3 after the two-mode electrolysis are as high as 96.8% and 96.5%, respectively. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater make this approach uniquely suited for modular deployment. Moreover, simulated brine and flue gas are investigated to demonstrate the adaptability of this technology for industrial application. It is found that the presence of sulfate can influence both the product purity and their associated efficiencies, due to the formation of sulfide byproduct. An electrochemical pathway is developed for brine partial desalination, resource recovery, and CO2 capture and mineralization for the selective precipitation of high-purity calcium carbonate and magnesium hydroxide. In this two-mode electrolysis, magnesium and calcium are separately recovered with efficiencies as high as 87% and 90%, respectively. This approach is a significant advance over existing pathways that do not selectively precipitate calcium carbonate and magnesium hydroxide from brine. The behavior of sulfate ions in simulated brine is also investigated. The use of industrial titanium mesh as an electrode presents an easy fabrication, effective, and durable material option for deploying this approach. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater, and increasing availability of low cost and low carbon electricity sourced from renewable energy resources make this approach uniquely suited for modular deployment.

Carbon dioxide mineralization by electrode separation for quick carbon reduction and sequestration in acidified seawater

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Enhanced CO2 Removal Through the Electrolysis of Concentrated Seawater and Accelerated Mineral Carbonation

Coupling Electrochemical Alkalinization and Mineral Dissolution for Ambient Removal of Both Influent CO2 and Dissolved Nitrite in Seawater

Possibility for CO2 Sequestration Using Sea Water

Using Electrochemical Process to Mineralize CO2 and Separate Ca2+/Mg2+ Ions from Hard Water to Produce High Value-Added Carbonates

Direct Air Capture of CO2 through Carbonate Alkalinity Generated by Phytoplankton Nitrate Assimilation

Electrolytic Seawater Mineralization and the Mass Balances That Demonstrate Carbon Dioxide Removal

Seawater alkalization via an energy-efficient electrochemical process for CO2 capture

Enhancing CO2 storage and marine carbon sink based on seawater mineral carbonation

Thorough conversion of CO2 through two-step accelerated mineral carbonation in the MgCl2-CaCl2-H2O system

Co2 Fixation in Ca2+-/Mg2+-Rich Aqueous Solutions Through Enhanced Carbonate Precipitation

Study of CO2 Capture by Seawater and Its Reinforcement

Potential Capture and Conversion of CO2 from Oceanwater Through Mineral Carbonation

Sequestration of CO2 Discharged from Anode by Algal Cathode in Microbial Carbon Capture Cells (Mccs)

Unlocking high carbonation efficiency: Direct CO 2 mineralization with fly ash and seawater

Design and Experiment of Distributed Seawater Carbon Sequestration Equipment

A Molten Calcium Carbonate Mediator for the Electrochemical Conversion and Absorption of Carbon Dioxide

Retrieval of CO2 from a carbonate solution for its sequestration by a novel electrochemical decarbonizing and ingathering method

Mixing and dilution controls on marine CO 2 removal using alkalinity enhancement

Electrochemical recovery of high-purity calcium carbonate and magnesium hydroxide from brine via carbon mineralization