Abstract:Laser powder bed fusion (LPBF), also called selective laser melting, is an additive manufacturing technology with great potential for creating three-dimensional metallic components with intricate designs. The application of dynamic thermal cycles involving melting and cooling makes it difficult to maintain the desired surface quality and shape in the LPBF process. The LPBF process's dynamic stability of the melt pool is essential to ascertain due to its influence on the quality of the manufactured products. Examining the thermal behavior and temperature distribution inside the melt pool is necessary. Subsequent to experimental validation, employing a finite element model (FEM) has the potential to accurately define thermal distributions and the dimensions of the melt pool. A three-dimensional transient model based on a moving Gaussian heat source was employed in this study to examine the influence of process variables (i.e., scan velocity, laser power, laser beam radius, hatch spacing, number of layers, and scan angle for each layer) on the melt pool shape in LPBF of SS316L powder. A finite element model based on three-dimensional parameters was proposed to evaluate the temperature gradient and melt pool characteristics of SS316L when subjected to laser powder bed fusion. The method takes into account the effect of the laser penetration depth on the characteristics of the molten pool, determined by a multiple-layer (15) and multiple-track (6) finite element model with variable process parameters, such as laser power, scanning speed, beam radius and hatch spacing. Experimental data obtained from the literature were used to calibrate the proposed heat source model, and the adjusted finite element model was then validated through further experiments. The modeling results showed concordance with the experimental data. The effects of the interlayer and intertrack were examined. Temperature distributions for each track and layer and the depth, width and length of the melt pool were evaluated, and the observed values for each variable were analyzed. The average melt pool length, width, and depth were determined to have relative errors of 1.88%, 1.49%, and 2.12%, respectively, between the FEM model and experimentally measured dimensions for an optimal range of varied process parameters.

Numerical Simulation of Thermal Dynamic Behavior and Morphology Evolution of the Molten Pool of Selective Laser Melting BN/316L Stainless Steel Composite

Thermal evolution behavior and fluid dynamics during laser additive manufacturing of Al-based nanocomposites: Underlying role of reinforcement weight fraction

Effect of Molten Pool Overlap on Mechanical Properties and Microstructure in Selective Laser Melting AISI 316L SS

Molten pool effect on mechanical properties in a selective laser melting 316 L stainless steel at high-velocity deformation

Wetting Kinetics and Microstructure Analysis of BNi2 Filler Metal over Selective Laser Melted Ti-6Al-4V Substrate

Numerical and Experimental Characterization of Melt Pool in Laser Powder Bed Fusion of SS316l

Study on the Numerical Simulation of the SLM Molten Pool Dynamic Behavior of a Nickel-Based Superalloy on the Workpiece Scale

Performance Study and Heat Treatment Analysis of Selective Laser Melting SiC/18Ni300 Martensitic Mold Steel Composites

Simulation and experimental studies on process parameters, microstructure and mechanical properties of selective laser melting of stainless steel 316L

Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing

Numerical Modelling and Experimental Validation of Selective Laser Melting Processes Using a Custom Argon Chamber Setup for 316L Stainless Steel and Ti6AI4V

Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L parts

Melt pool evolution and microstructure simulation of SLM 316L based on SPH-PFM coupling model

Modelling and Numerical Simulation During Selective Laser Melting of Stainless Steel 316L Via Particle by Particle Approach

Simulation of Stress Field during the Selective Laser Melting Process of the Nickel-Based Superalloy, GH4169

Mesoscopic Simulation of Core–Shell Composite Powder Materials by Selective Laser Melting

Experimental and numerical comparison of heat accumulation during laser powder bed fusion of 316L stainless steel

A Numerical Study on the Mesoscopic Characteristics of Ti-6Al-4V by Selective Laser Melting

Mesoscopic simulation of surface morphology and thermodynamic mechanism during laser powder-bed fusing Ni-based composite: Underlying role of WC weight fraction

Thermal behavior and fluid dynamics within molten pool during laser inside additive manufacturing of 316L stainless steel coating on inner surface of steel tube

Evolution of molten pool during selective laser melting of Ti–6Al–4V