Abstract:The evolution of surface morphologies of films prepared by ion-based deposition techniques has been investigated by atomic force microscopy. Two deposition processes, filtered arc deposition (FAD) and ion-beam-assisted deposition, where low-energy (<100 eV) ion irradiation and high-energy (several tens of keV) ion-beam bombardment concurrent with film growth were involved, respectively, have been employed to prepare TiN and Al films. Comparative studies on the effect of energetic ions on the development of topography have been performed between the low-ion-energy regime and high-ion-energy regime. In addition, the relationship between topography and mechanical properties of thin films has been revealed, by involving thin films prepared by thermal evaporation deposition (TED), where almost all depositing particles are neutral. In the images of the TED TiN and Al films, a large number of porous and deep boundaries between columnar grains was observed, suggesting a very rough and loose surface. In contrast, the FAD films exhibited much denser surface morphologies, although still columnar. The root-mean-square roughness of the FAD films was less than 1 Å. Hardness test and optical parameter measurement indicated that the FAD films were much harder and, in the case of optical films, much more transparent than the TED films, which was considered to arise from the denser surface morphologies rather than crystallization of the films. The high density and super smoothness of the FAD films, and the resultant mechanical and optical properties superior to those of the TED films, were attributed to the enhancement of surface migration of the deposited adatoms in the FAD process, which could provide intensive low-energy ion irradiation during film growth. As for topography modification by high-energy ion-beam bombardment concurrent with film growth, in addition to the increase of surface diffusion due to elastic collision and thermal spikes, physical sputtering must be considered while explaining the development of the film topography. Both surface migration enhancement and sputtering played important roles in the case of high-energy heavy-ion-beam bombardment, under which condition surface morphology characterized by dense columns with larger dimension and deep clean boundaries was formed. However, under high-energy light-ion-beam bombardment, the sputtering was dominant, and the variation of sputtering coefficient with position on the surface of growing film led to the formation of cones.

Growth of Nanostructured TiO2 Thin Films onto Lignocellulosic Fibers through Reactive DC Magnetron Sputtering: A XRD and SEM Study

Influence of Iron Dopant on Crystallization and Photo-Induced Hydrophilicity of TiO2 Thin Films

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

The growth mode of α-Fe2O3 thin films by DC magnetron sputtering

Effect of substrate temperature and annealing on the growth of TiO2‐x thin films deposited by using DC‐magnetron sputtering technique

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

TiO2 films prepared by DC reactive magnetron sputtering at room temperature: Phase control and photocatalytic properties

Characterization of titanium oxide thin films obtained by galvanostatic anodization in black acacia pyroligny liqueur

Atomic Force Microscopy Study on Topography of Films Produced by Ion-Based Techniques

Tailoring the nanostructure of Ti–Si–N thin films by HiPIMS in deep oscillation magnetron sputtering (DOMS) mode

TiO2NTs bio-inspired coatings: revisiting electrochemical, morphological, structural, and mechanical properties

Photo-induced catalytic characteristics of TiO2 thin films deposited by DC reactive magnetron sputtering

Modifying of surface properties and structural characteristics of low energy argon beam irradiated methylcellulose/TiO2 nanocomposite films

Biopolymer‐Templated Deposition of Ordered and Polymorph Titanium Dioxide Thin Films for Improved Surface‐Enhanced Raman Scattering Sensitivity

Studies of Photo-induced Characteristics of Nanoscale Titanium Dioxide Thin Films Grown by RF Magnetron Sputtering

Optimization of Ti2O3 thin films by magnetron sputtering and study of their photoelectric performance

Effect of ion bombardment on the structural and optical properties of TiO 2 thin films deposited from oxygen/titanium tetraisopropoxide inductively coupled plasma

Deposition of TiO2 by Medium Frequency Reactive Dual Magnetron Sputtering

Nanostructure and Photocatalytic Properties of TiO2 Films Deposited at Low Temperature by Pulsed PECVD

Influence of Sb Dopant in TiO2 Film Growth by DC Reactive Magnetron Sputtering

Impact of atomic layer deposited TiO2 on the photocatalytic efficiency of TiO2/w-VA-CNT nanocomposite materials