Abstract:As an additive manufacturing technique, the laser-aided direct energy deposition (L-DED) method has been widely used for component repair (also called laser repair). With significant differences from traditional manufacturing techniques, the laser repair process has the characteristics of point-by-point deposition and has a high-temperature gradient in the repair area, resulting in the formation of heterogeneous thermal deformation and residual stress after cooling. High stress may lead to the appearance of cracks in the repair area and may seriously influence the bearing capacity of the repaired parts. Therefore, the characterization of the temperature and deformation fields of the components during laser repair is important for the analysis of the mechanism of damage evolution in the repair area, optimization of the process parameters, and improvement of the mechanical properties of the repaired components. Because of the demand for the simultaneous measurement of the temperature and deformation fields, using a multispectral camera and a self-designed three-peak filter, a temperature-deformation field measurement technique was developed and applied to in situ monitoring during the L-DED manufacturing process. In the actual measurement process, the synchronous measurement of the temperature field of the laser molten pool and the deformation field of the side surface of the repaired component were realized using the images of multiple channels in the multispectral camera. The experimental results verify that a three-peak filter can effectively eliminate the influences of glare and overexposure on the recorded multispectral images. Moreover, the amplitude of the displacement field and the temperature gradient of the repaired component will increase with the increase in laser power, which may affect the final molding of the repaired component. This work extends the function of the multispectral camera to measure the temperature and deformation fields and provides a new measurement method for further optimizing the process parameters of laser repair.

Three-Dimensional Numerical Simulation of Repairing Process by Laser Direct Energy Deposition

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Multiphysics coupling in situ measurement method for laser repair of the Inconel 718 alloy structure

Effect of Pre-Heating on Residual Stresses and Deformation in Laser-Based Directed Energy Deposition Repair: A Comparative Analysis

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

Examination of steel compatibility with additive manufacturing and repair via laser directed energy deposition

Evaluating the effect of repair using direct laser metal deposition on the fracture resistance of the cracked 1.2714 tool steel component

Microstructure and Mechanical Properties of IN718 on 42crmo for Repair Applications by Laser Directed Energy Deposition

Multiscale Simulation of Laser-Based Direct Energy Deposition (DED-LB/M) Using Powder Feedstock for Surface Repair of Aluminum Alloy

Development of Laser Welding Simulation Code with Advanced Numerical Models

Numerical Simulation and Experimental Analysis of Thermal Conduction and Stress in Laser Cladding Repair of Thin-Walled Parts

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Effect of deposition strategy and post processing on microstructure and mechanical properties of serviced Inconel 625 parts repaired using laser directed energy deposition

Distribution of Microstructure, Elastic Modulus and Residual Stress Near the Interface in Laser Repaired GH4169 Superalloy

Laser-based directed energy deposition of Monel K-500 and Stellite 6 multi-materials

Finite Element Numerical Simulation and Repair Process of Laser Cladding Repair of Surface Cracks on Mechanical Parts

Processing Correlations of Laser Direct Energy Deposited Inconel718 Based on Multi-Field Numerical Simulation

Investigation of micro-spot laser directed energy deposition of 18Ni-300 maraging steel towards repair applications

Defect recognition in Ti-6Al-4V fabrication by in situ monitoring of directed energy deposition using a laser beam

Mechanical Performance of Laser Deposition Repairing of in 738 on Directionally Solidified Superalloy Blade

Physical Simulation of Mold Steels Repaired by Laser Beam Fusion Deposition