Abstract:Solidification conditions and cooling rate can significantly affect the microstructure and the mechanical properties of Nickel-based superalloy GH4169 components repaired by laser direct energy deposition (L-DED). In this work, we employ inter-channel dwell time in the l-DED repairment of GH4169 superalloy groove in order to control the thermal cycles during deposition, thus regulating the microstructure and tensile properties of repaired GH4169 groove. The tensile properties of materials repaired by using different inter-channel dwell times were compared by tensile tests with digital image correlation (DIC) technique, and the microstructure and fracture mechanism were also investigated by scanning electron microscope (SEM). Results show that the dendrite structure, grain size of recrystallization, primary dendrite arm spacing, distribution of Laves and γ'' phases of the repaired material are significantly different under different inter-channel dwell times of 0 s, 4 s, 8 s and the associated different thermal cycles. The content of the Laves phases is lower, the grain size is smaller and distribution of γ'' phases are relatively uniform with the additional dwell time of 8 s. Owing to the difference in microstructure, the tensile strengths of both the repaired material and the substrate material increase with the increase of inter-channel dwell time. Moreover, the repaired GH4169 materials exhibit similar or even higher tensile strength than that of the substrate GH4169 material. Besides, due to the uneven precipitation of Nb element in repaired material and the associated change of Laves phases and carbides, the measured elongations of the substrate are larger than those of the repaired materials. The changes in microstructure under varying dwell times also lead to differences in strain localization and strain hardening exponent of the repaired materials. The present study paved a novel way to achieve high-quality repair of superalloys via laser direct energy deposition.

Investigation of micro-spot laser directed energy deposition of 18Ni-300 maraging steel towards repair applications

Laser-based directed energy deposition of Monel K-500 and Stellite 6 multi-materials

Effects of Oxygen Content on Microstructure and Mechanical Properties of 18ni300 Maraging Steel Manufactured by Laser Directed Energy Deposition

Examination of steel compatibility with additive manufacturing and repair via laser directed energy deposition

Influence of Processing Parameters and Heat Treatment on the Mechanical Properties of 18ni300 Manufactured by Laser Based Directed Energy Deposition

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

Laser-Aided Directed Energy Deposition of Steel Powder over Flat Surfaces and Edges

Determining the Effects of Inter-Layer Time Interval in Powder-Fed Laser-Directed Energy Deposition on the Microstructure of Inconel 718 via In Situ Thermal Monitoring

Directed energy deposition of PH 13–8 Mo stainless steel: microstructure and mechanical property analysis

Processing Correlations of Laser Direct Energy Deposited Inconel718 Based on Multi-Field Numerical Simulation

Microstructure and Mechanical Properties of IN718 on 42crmo for Repair Applications by Laser Directed Energy Deposition

Influence of processing parameters on the thermal history, microstructure and tensile properties of Inconel 738 produced by laser directed energy deposition

Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening

A new laser remelting strategy for direct energy deposition of 316L stainless steel

Investigation on the Process and Microstructure Evolution During Direct Laser Metal Deposition of 18Ni300

Maraging Steel Laser Additive Manufacturing Process and Microstructure Study

Microstructure and Mechanical Properties of a Monel K-500 Alloy Fabricated by Directed Energy Deposition

Effects of Laser Rescanning on Microstructure and Mechanical Properties of Al-10Si-1Mg Alloy Produced by Laser-Directed Energy Deposition

Laser Directed Energy Deposition of Bulk 316L Stainless Steel

Development of a laser preheating concept for directed energy deposition

Combining Manufacturing of Titanium Alloy Through Direct Energy Deposition and Laser Shock Peening Processes