Abstract:Non-conventional collectors where organic fluid or refrigerant experience a phase change have many advantages over conventional collectors which have either air or relatively high temperature boiling liquid. Increase in heat transfer coefficient and system efficiency, corrosion prevention and freeze protection are the main benefits of the first type. In this study, a detailed numerical model of a flat plate collector is developed to investigate the fluid mean temperature, useful heat gain and heat transfer coefficient along the collector tube. The refrigerant HFC-134a was used in the simulation as the working fluid of the collector. The model can both predict the location where the fluid undergoes a phase change in the tube and the state at the exit under given inlet conditions. The effect of boiling on the heat transfer coefficient of the fluid is also investigated. Simulations were performed at three different mass flow rates (0.001, 0.005 and 0.01 kg/s) and three different operating pressures (4, 6 and 8 bar) to be able to see the effect of mass flow rate and pressure on plate temperature, heat loss coefficient, efficiency of the collector and the heat transfer coefficient of the fluid. The simulation results indicate that the heat transfer coefficient of the fluid increases from 153.54 W/m(2) K to 610.27 W/m(2) K in multiphase flow region. In the liquid single phase region, the collector efficiency rises from 60.2% to 68.8% and the heat transfer coefficient of the fluid increases from 39.24 W/m(2) K to 392.31 W/m(2) K with an increased flow rate whereas the collector efficiency decreases from 72.5% to 62.3% as the operating pressure increases from 4 bar to 8 bar. In order to validate the simulation model an experimental test rig was built and the experiments were performed with HFE 7000 as working thermo-fluid. A new simulation model utilizing HFE 7000 has been developed and the outlet temperature of the fluid was compared with the measured outlet temperature. Both measured and simulated results have shown close conformity. (C) 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

Modeling and Experimental Evaluation of the Effects of Reflective Film and Vacuum on the Performance of Concentric Double Tube Direct Flow Solar Collector

Thermal evaluation of geometrical innovations in concentric and eccentric evacuated single and double solar collectors

Modeling and Performance Optimization of the U-pipe Glass Evacuated Tube Solar Collector

Experiment and numerical simulation on flow and heat transfer in all-glass evacuated tube solar collectors

Performance Simulation of a Parabolic Trough Solar Collector

Numerical and experimental investigation of the effect of radiant reflector on the conical solar collector for heat transfer enhancement

Numerical Simulation On The Optical And Thermal Performance Of A Modified Integrated Compound Parabolic Solar Concentrator

Experimental Investigation and Analysis on a Concentrating Solar Collector Using Linear Fresnel Lens

ANALYSIS OF THERMAL PERFORMANCE OF EVACUATED TUBULAR SOLAR AIR COLLECTOR WITH INSERTED TUBES

Computational Modeling of a Small-Scale, Solar Concentrating Device Based on a Fresnel-Lens Collector and a Flat Plate Receiver with Cylindrical Channels

Experimental and Theoretical Analysis on a Linear Fresnel Reflector Solar Collector Prototype with V-shaped Cavity Receiver

Numerical and Experimental Analysis of a Point Focus Solar Collector Using High Concentration Imaging PMMA Fresnel Lens

Mathematical Modelling and Simulation of Multiphase Flow in a Flat Plate Solar Energy Collector

Thermal Performance of a Flat-Plate Solar Collector for Drying Agricultural Crops

Numerical Analysis and Experimental Validation of Heat Transfer Characteristic for Flat-Plate Solar Air Collector

Numerical Investigation of the Photo-Thermal Characteristics of a Direct Absorption Solar Collector Using Monte Carlo and Finite Volume Methods

Experimental and Numerical Analysis of an Efficiently Optimized Evacuated Flat Plate Solar Collector under Medium Temperature

Numerical and Experimental Determination of Selected Performance Indicators of the Liquid Flat-Plate Solar Collector under Outdoor Conditions

Numerical Simulation and Experimental Validation of Tri-Functional Photovoltaic/Thermal Solar Collector

Experimental Study of A Linear Fresnel Collector with Triangular-Cavity Absorber

Simulation and Optical Analysis on the Linear Fresnel Reflective Solar Collector