Abstract:The flat-plate solar collector is the most common and widely used model of solar collectors. This model of solar collectors is more popular than other solar collectors due to its easy installation and lower cost. It is possible to further reduce the cost and size of these systems by improving their performance. For this purpose, simultaneous application of external uniform magnetic field (MF), water-Fe 3 O 4 ferrofluid, and twisted tape turbulator along with changing the cross-section of the serpentine absorber tube of a collector is proposed in the present research. The outlet temperature of working fluid, pressure drop of working fluid, the rate of thermal energy transferred to the flowing fluid in the collector along with the entropy production rate in the system due to fluid friction and heat transfer were considered as the performance parameters of the system. The effect of cross-section of absorber tube (circular, square, triangular), Reynolds number ( Re = 500, 1000, 1500 and 2000), pitch distance of turbulator ( δ = 150 mm, 200 mm and 250 mm), ferrofluid volume fraction ( σ = 0, 1 %, 2 % and 4 %) and magnetic field intensity (0, 600, 900 and 1200 Gauss) on these parameters was investigated numerically using the finite volume method. In the investigations conducted in the absence of MF, collectors equipped with circular and triangular absorber tubes showed the best and worst thermal performance, respectively, while the lowest and highest total entropy production rate was associated with collectors equipped with circular and rectangular tubes, respectively. Moreover, the escalation in σ from 0 % to 4 % and under the MF effect showed an increase of 0.14 %, 8.62 %, 0.45 %, and 4.55 % in the outlet temperature, pressure drop, useful heat, and thermal entropy generation rate, respectively. While the frictional entropy generation diminished by 8.73 %. In addition, the intensification of MF intensity from 0 G to 1200 G led to enhance the outlet temperature, useful heat, and pressure drop, by almost 0.0014 %, 3.96 %, and 0.013 %, respectively at three different σ values. While total entropy generation rate reduces by 0.195 % as MF intensity increases from 0 G to 1200G. Meanwhile, the results of neural network modeling were presented as two second-order polynomial functions to predict the total entropy generation rate and useful heat under the MF effects.

EFFECT OF ELECTROMAGNETIC FIELD ON THE THERMAL EFFICIENCY OF CONCENTRATED SOLAR COLLECTOR (EXPERIMENTAL STUDY)

Optimizing photothermal conversion efficiency in a parabolic trough direct absorption solar collector through ferrofluid and magnetic field synergy

Physical Effect of a Variable Magnetic Field on the Heat Transfer of a Nanofluid-Based Concentrating Parabolic Solar Collector

Heat transfer and exergy destruction analyses with ferrofluid in LS-3 solar collector under dipole magnetic field

Heat transfer study of a new hybrid photovoltaic/thermal direct absorption parabolic solar collector by two-phase Buongiorno model

An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector

Improving Environmental Performance of a Direct Absorption Parabolic Trough Collector by Using Hybrid Nanofluids

Performance study of parabolic trough solar collector using hybrid nanofluids under Jordanian weather conditions

Heat Transfer Enhancement in Parabolic through Solar Receiver: A Three-Dimensional Numerical Investigation

Experimental Study on the Performance of a Flat-Plate Collector Using WO3/Water Nanofluids

The application of non-uniform magnetic field for thermal enhancement of the nanofluid flow inside the U-turn pipe at solar collectors

Comparative performance assessment of different absorber tube geometries for parabolic trough solar collector using nanofluid

Exploring the thermal efficiency of Fe3O4–H2O flow in a microchannel under the effects of a magnetic field

Use of machine learning in predicting heat transfer and entropy generation in a flat plate solar collector with twisted tape turbulator and ferrofluid under the influence of an external uniform magnetic field: A numerical study

Enhance thermal efficiency of parabolic trough collector using Tungsten oxide/Syltherm 800 nanofluid

The thermal conductivity of water base ferrofluids under magnetic field

Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids

Exergy and energy amelioration for parabolic trough collector using mono and hybrid nanofluids

Performance study on eutectic molten salt as a high temperature working fluid in the parabolic trough collector

Hydrothermal performance assessment of a parabolic trough with proposed conical solar receiver

Numerical study on thermal–hydraulic characteristics in a inclined mini-channel for solar PV panel cooling with external magnetic field and magnetic nanofluid