Abstract:Since early 1990s lithium-ion batteries (LIBs) have become the most important secondary/rechargeable battery technology for portable electronic devices; and more recently for battery powered vehicles. Extensive research has been conducted on high-capacity electrode materials for LIBs due to the emerging demands for high energy density batteries for electric vehicles. Compared with the conventional cationic redox-based cathode materials, such as NMC, LMO and LFP, Li-excess, Manganese rich layered cathode (LLC) materials containing cationic and anionic redox process, show great potential as the next generation cathode materials because of their higher theoretical specific capacity and lower raw material cost. Our work has shown that Ni content of the Co-free, LLC materials, Li 1.2 Ni x Mn 0.8-x O 2 (x = 0.12, 0.24, 0.30 and 0.36) prepared by a citric acid method, has a significant impact on the material structure, electrochemical performance, and thermal stabilities. Generally, the primary particle size increased as the Ni content increased with a primary particle size distribution in the range of 200–600 nm for the samples investigated. Monoclinic phase (C2/m) and spinel (Fd3m) phase depending on the content of Ni have been identified by XRD. With increasing Ni content, the fraction of the spinel phase decreased and eventually the pure layered structure was obtained on the samples at x = 0.30 and 0.36. Our work demonstrates that the charging and discharging capacities are determined by the Ni or Mn content. The highest charging and discharging capacities were achieved when x = 0.24. As Ni content increased, the first cycle coulombic efficiency decreased, and the thermal stability deteriorated. But, an increase in Ni content results in an increase in average discharge voltage, higher electrochemical stability of the layered structure, fast Li ions diffusivity. Li 1.2 Ni 0.12 Mn 0.68 O 2 sample exhibited the best capacity retention and thermal stability among the tested samples. However, its specific energy density was limited due to the lowest average discharge voltage. The Li 1.2 Ni 0.36 Mn 0.44 O 2 sample which contained the highest Ni content exhibited the worst thermal stability, but relatively higher specific energy density due to the highest average discharge voltage.

Impact of Ni Content on the Electrochemical Performance of the Co-Free, Li and Mn-Rich (Lmr) Layered Cathode Materials

Impact of Ni Content on the Electrochemical Performance of the Co-Free, Li and Mn-Rich Layered Cathode Materials

Recent progress in Li and Mn rich layered oxide cathodes for Li-ion batteries

Effect of Co/Mn content on electrochemical properties of Ni-rich LiNi0.9CoxMn0.1-xO2

Impact of Ni Content on the Structure and Electrochemical Performance of the Co-Free, Li/Mn-Rich Layered Cathode Materials

Delocalized Li@Mn6 Superstructure Units Enable Layer Stability of High-Performance Mn-rich Cathode Materials

Revealing Roles of Co and Ni in Mn‐Rich Layered Cathodes

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Reinforcing the Stability of Cobalt-free Lithium-rich Layered Oxides via Li-poor Ni-rich Surface Transformation

Li- and Mn-rich layered oxide cathode materials for lithium-ion batteries: a review from fundamentals to research progress and applications

Improving the Cycling Performance of the Layered Ni-Rich Oxide Cathode by Introducing Low-Content Li2mno3

Voltage Decay in Layered Li-Rich Mn-Based Cathode Materials

Improving electrochemical performance of Li-rich cathode materials via adjusting the components

Highly Activated Oxygen Redox Enabling Large-capacity Li-rich Layered Manganese-Based Oxide Cathode

High-Energy Cathode Materials (Li2mno3-Limo2) for Lithium-Ion Batteries

A Li-rich Layered Oxide Cathode with Negligible Voltage Decay

Surface Engineering of Li- and Mn-rich Layered Oxides for Superior Li-ion Battery

A Novel Strategy to Suppress Capacity and Voltage Fading of Li‐ and Mn‐Rich Layered Oxide Cathode Material for Lithium‐Ion Batteries

Exploit Li 2 MnO 3 activity by two phase coexistence at atomic level towards high performance Mn-based Co-free Li-rich cathodes

Design of a new Li-rich Mn-based ternary cathode material based on Ni, Co, and Mn action mechanism

Structural insights into composition design of Li-rich layered cathode materials for high-energy rechargeable battery