Abstract:To study the effect of micro-texture on the cutting performance of polycrystalline cubic boron nitride (PCBN) tools, five types of micro-textures (circular pits, elliptical grooves, transverse grooves, composite grooves, and wavy grooves) were applied to the rake surface of PCBN tools by an optical fiber laser marking machine. Through a combination of three-dimensional cutting simulations and experiments, the influences of micro-texture on chip–tool contact area, cutting force, chip morphology, shear angle, and surface roughness during the cutting process were analyzed. The results indicated that the chip–tool contact area and cutting force of both non-textured and micro-textured tools increased with increasing cutting speed, while the shear angle decreased with increasing cutting speed. The chip–tool contact area and cutting force of the five types of micro-textured tools were smaller than those of the non-textured tool. The chip–tool contact area and cutting force obtained by the wavy-groove micro-textured tool were the smallest. The chip radius produced by the five types of micro-textured tools was smaller than that produced by the non-textured tool, and the chip morphology was more stable. The transverse-groove micro-textured tool had a better chip breaking effect. The chip radius generated by the elliptical-groove micro-textured tool was 0.96 cm, while that generated by the wavy-groove tool varied from 0.55 cm to 1.26 cm. The presence of a micro-texture reduced the surface roughness of the workpiece by 11.73%–56.7%. Under the same cutting conditions, the five types of micro-textured tools gave a smaller chip–tool contact area, cutting force, chip radius, and surface roughness and a larger shear angle than the non-textured tool. In addition, the elliptical-groove and wavy-groove micro-textured tools had better cutting performance.

Study on cutting performance of double-inclined-wall cosine enhanced PCBN tool

Wear Behaviors of Pcd Tools in Turning Granite

Analysis of the Chip-Splitting Performance of a Dedicated Cutting Tool in Dry Orbital Drilling Process

Wear performance and mechanisms of PCBN tools in boring of powder metallurgy steels

Cutting performance and tool wear mechanism of corrugated helical PCD tool in milling Cf/SiC composites

Cutting performance and wear behavior of diamond, coated cemented carbide and PCBN tools during milling of C f /SiC composites

Cutting Performance and Wear/Damage Characteristics of PCBN Tool in Hard Milling

Experimental Investigation on the Machinability of PCBN Chamfered Tool in Dry Turning of Gray Cast Iron

Investigation on Cutting Performance of Micro-Textured Cutting Tools

Effect of tool wear on machining quality in milling C f /SiC composites with PCD tool

A novel hybrid micro-texture for improving the wear resistance of PCD tools on cutting SiCp/Al composites

Experimental Study on Chip Shape and Tool Wear of High-Speed and Micro-Feed Cutting

Cutting performance of micro-textured PCBN tool

Influence of cutting parameters on PCD tool wear during milling tungsten carbide

Wear study of CBN tools in laser ultrasonic composite cutting of cemented carbide

An anti-wear tool structure with integrated-micro hybrid cutting edges for milling of carbon fiber–reinforced plastics composites

Edge Sharpening and Surface Modification of PcBN Cutting Tool by Pulsed Laser Grinding

Study on Cutting Force and Tool Wear in Machining of Die Materials with Textured PCD Tools Under Ultrasonic Elliptical Vibration

Study on tool wear for efficient grooving blisk with disc milling cutter

Drilling process of Cf/SiC ceramic matrix composites: Cutting force modeling, machining quality and PCD tool wear analysis

Effect of diamond grain size on mechanical properties and cutting performance of PCD tool in milling of C f /SiC composites