Abstract:In this study, the variation of fatigue stiffness, fatigue life, and residual strength, as well as the macroscopic damage initiation, expansion, and fracture of CFRP (carbon fiber reinforced polymer) rods in bending-anchored CFRP cable, were investigated experimentally to verify the anchoring performance of the bending anchoring system and evaluate the additional shear effect caused by bending anchoring. Additionally, the acoustic emission technique was used to monitor the progression of critical microscopic damage to CFRP rods in a bending anchoring system, which is closely related to the compression-shear fracture of CFRP rods within the anchor. The experimental results indicate that after the fatigue cycles of two million, the residual strength retention rate of CFRP rod was as high as 95.1% and 76.7% under the stress amplitudes of 500 MPa and 600 MPa, indicating good fatigue resistance. Moreover, the bending-anchored CFRP cable could withstand 2 million cycles of fatigue loading with a maximum stress of 0.4 σult and an amplitude of 500 MPa without obvious fatigue damage. Moreover, under more severe fatigue-loading conditions, it can be found that fiber splitting in CFRP rods in the free section of cable and compression-shear fracture of CFRP rods are the predominant macroscopic damage modes, and the spatial distribution of macroscopic fatigue damage of CFRP rods reveals that the additional shear effect has become the determining factor in the fatigue resistance of the cable. This study demonstrates the good fatigue-bearing capacity of CFRP cable with a bending anchoring system, and the findings can be used for the optimization of the bending anchoring system to further enhance its fatigue resistance, which further promotes the application and development of CFRP cable and bending anchoring system in bridge structures.

Experimental study on dynamic bending rigidity of aluminium cable steel reinforced

The model experimental research on rib-patterned large-span spatial cable-truss tensile structure with annular plane

Study on static behaviour of cable domes

Dynamic characteristics of CFRP cables under lateral wind load

Static model and cross section characteristic analysis of steel strand

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

A finite-volume method for large deflection wind-excited response analysis of suspended cables

Investigation of sag behaviour for aluminium conductor steel reinforced considering tensile stress distribution

Estimation of Overhead Transmission Lines ACSR Combined Elastic Coefficient

Research on the Dynamic Characteristics of Cables Considering the Constraints at Both Ends of the Cables

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Research on the bending stiffness of hollow CFST members

Analytical Determination of Static Deflection Shape of an Asymmetric Extradosed Cable-Stayed Bridge Using Ritz Method

Aerodynamic performance and wind-induced response of carbon fiber-reinforced polymer (CFRP) cables

Experimental Investigation of Fatigue Capacity of Bending-Anchored CFRP Cables

Effect of Suspension Clamp Types on the Dynamic Bending Stress of All Aluminium Alloy 1120 Overhead Conductors

An Experimental Study of Dynamic Icing Process on an Aluminum-Conductor-Steel-Reinforced Power Cable with Twisted Outer Strands

Study on the Wind-Induced Vibration of Cfrp Cable with the Consideration of Fluid-Solid Coupled Effect

Feasibility study for online assessment on fatigue failure of aluminum cable steel reinforced conductors based on DC resistance measurement method

Parametric vibration of carbon fiber reinforced plastic cables with damping effects in long-span cable-stayed bridges