Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Rolling element bearings are the most important components in almost all rotating machines. These bearings are often subjected to repetitive load cycles at different operating conditions. Excessive loads, speeds, and improper operating conditions lead to the propagation of defects on their load-bearing surfaces, thereby causing a negative impact on the performance of rotating machines. This paper presents the results of experimental investigations to assess wear propagation in roller bearings using lubricant degradation, vibration, and statistical parameter analysis methods. A roller bearing setup was developed in the laboratory, and the test bearing (NJ 307E) was subjected to fatigue tests over a period of 900 h. The bearing was operated at a speed and radial load of 800 rpm and 1 kN, respectively. The film thickness analysis revealed a transition in lubrication regimes during 600–900 h of operation. Grease structure degradation and oxidation analyses were carried out using scanning electron microscope images and the Fourier transform infrared radiation technique. Further, the vibration signals are extracted from the bearing housing at regular intervals. Using the fast Fourier transform technique, these vibration signals were used to analyze bearing fault frequencies to highlight the faults developed on bearing contact surfaces. The statistical features of vibration signals such as root mean square, kurtosis, and crest factor were used to assess the severity of wear propagated on the bearing contact surfaces. Integrating tribological and vibration parameter analysis techniques provided a reliable assessment of surface fatigue wear propagated on the roller-bearing contact surfaces.

Study Upon Cylindrical Roller Bearing Profile Optimisation Using FEA

Dynamic Characteristic Analysis of High-speed Spherical Ball Bearing

Research on advances in roller bearing manufacturing

Study of the Plastic Behavior of Rough Bearing Surfaces Using a Half-Space Contact Model and the Fatigue Life Estimation According to the Fatemi–Socie Model

Structures Dynamic Property Analysis of Elastic Composite Cylindrical Rolling Element

Enhanced modelling of planar radial-loaded deep groove ball bearings with smooth-contact formulation

Mixed Lubrication Analysis of Tapered Roller Bearings and Crowning Profile Optimization Based on Numerical Running-In Method

Finite element analysis on crowning of roller with logarithmic profile

Contact of Tapered Roller with Logarithmic Profile

Study on Dynamics of Rolling Bearings

A Review of Computational Fluid Dynamics Approaches Used to Investigate Lubrication of Rolling Element Bearings

A fatigue failure investigation and improvement of a high-speed cylindrical roller bearing in a turbofan engine

Experimental investigations to assess surface fatigue failure in rolling contact bearing

Computational Fluid Dynamics Study of Oil Lubrication in Ball and Roller Bearings

Numerical Running-In Method for Modifying Cylindrical Roller Profile under Mixed Lubrication of Finite Line Contacts

Influence of surface texture on pocket pairs lubrication performance of cylindrical roller bearings

Analysis of Mechanical Properties and Fatigue Life of Microturbine Angular Contact Ball Bearings under Eccentric Load Conditions

The use of FEM to evaluate the influence of logarithmic correction parameters of roller generators on the axle box bearing life

Influence of micro-texture radial depth variations on the tribological and vibration characteristics of rolling bearings under starved lubrication

Study on the wear characteristics of cylindrical needle bearings on the crankshaft of RV decelerator

Frictional contact analysis in a spherical roller bearing