Abstract:This paper is the first part of a three paper series studying the overall performance of a micro pin-fin heat sink with single phase liquid flow and different pin-fin geometries operating under and similar conditions. Two different heat sinks, one with square shaped pin-fins and the other with circular pin-fins are selected for study in this paper. The paper focuses on studying the effect of thermal resistance and pressure drop of micro heat sinks when subjected to various factors such as pitch distance in axial and transverse directions, aspect ratio of the pin-fin, hydraulic diameters of the pin-fin, and the liquid flow rate through the device. A figure of merit (FOM) involving both the thermal resistance and pressure drop across the heat sink is introduced in the paper and the performance is evaluated on the basis of this FOM. The heat sinks are subjected to uniform heat flux at the bottom of the heat sink and the characteristic study is based on constant Reynolds number of liquid flow at the entrance of the channel. Water is used as the fluid in this study. The study is conducted over the Reynolds number range of 50–500. The characteristic study is carried out with the help of simulations developed using commercially available computational fluid dynamics software CoventorWare™. The characteristic study carried out in this paper is divided into four cases. In the first case the axial pitch distance is varied between 350 μm and 650 μm by keeping the aspect ratio of the pin-fin structure constant at 0.5. For the second case the transverse pitch distance is varied between 150 μm and 300 μm and the aspect ratio is kept the same as in the first case. Third case studies the effect of varying the aspect ratio (between 0.33 and 1) of the pin-fin structures by keeping both pitches constant. Case four studies the variation in the performance of the heat sink with the change in the hydraulic diameter of the pin-fins. The study conducted in this paper reveals the importance of considering the pressure drop along with the thermal resistance in evaluating the overall performance of the micro pin-fin heat sink. At low Reynolds number (below 300) the heat sinks with circular pin-fins shows better performance compared with heat sinks with square pin-fins and vice versa at high Reynolds number (above 300). FOM varies considerably with the change in the parameters like axial pitch distance, transverse pitch distance, aspect ratio and hydraulic diameter of the pin-fins.

Numerical study of the influence of the micro pin fin arrangement on the thermal and hydraulic performance of a micro heat sink

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Numerical and experimental analysis of cooling performance of single-phase array microchannel heat sinks with different pin-fin configurations

Experimental and Numerical Investigation of Hydrothermal Performance of a Microchannel Heat Sink with Pin Fins

Experimental and Numerical Study on Thermofluidic Characteristics of Microchannel Heat Sinks with Various Micro Pin–fin Arrays Arrangement Patterns

Parametric study on the combined thermal and hydraulic performance of single phase micro pin-fin heat sinks part I: Square and circle geometries

Experimental Study on Liquid Flow and Heat Transfer in Micro Square Pin Fin Heat Sink

Optimization of elliptical pin-fin microchannel heat sink based on artificial neural network

Computational analysis of microchannel heat sinks with constant circular pin fins: Performance evaluation and optimization

Convective heat transfer in micro pin fin heat sinks with different cross section shapes under variable heating loads

Numerical study and optimization of thermal efficiency for a pin fin heatsink with nanofluid flow by modifying heatsink geometry

Influence of fin length and width on flow and heat transfer performance of miniature heat sinks

Numerical Study of the Temperature Effects on Heat Transfer Coefficient in Mini-Channel Pin-Fin Heat Sink

Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance

Influence of heating load on heat transfer characteristics in micro-pin-fin arrays

Experimental Study of Water Flow and Heat Transfer in Silicon Micro-Pin-Fin Heat Sinks

Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins

Numerical comparison of hydrothermal performance and entropy generation features of micro pin fin heat sinks with different multi-dimensional stepnesses

Heat Removal Capacity of Laminar Coolant Flow in a Micro Channel Heat Sink with Different Pin Fins

Numerical Study of Enhanced Heat Transfer of MicroChannel Heat Sink with Nanofluids