Abstract:It was proposed new technologies for producing effective oil sorbents based on chemical industry waste. It was shown the possibility of using PET waste as a binder in the produc- tion of oil sorbents with specific properties (hydrophobicity, oleophilicity, magnetic proper- ties) using thermally expanded and oxidized graphite (TEG and OG) and ferritized iron- containing galvanic sludge (FGS). The presence of iron ions in the galvanic sludge allows one to obtain magnetite and ferrites during ferritization, which leads to the appearance of magnetic properties in FGS, established using a vibration magnetometer, the saturation induction was ~ 0.02 T. Electroplating sludge was carried out at t ≈ 1000 oC and τ = 1.5 hr with preliminary mechanical activation. The physicomechanical, chemical, and sorption properties of the obtained oil sorbents (bulk density, abrasion, grindability, particle size distribution, oil capacity, moisture capacity, wettability, buoyancy, specific surface area, chemical composition, adsorption capacity of materials under static and dynamic conditions) are studied. It was found that sorption ma- terials have 100% buoyancy, are highly active in cleaning water surface from films of oil products with different thicknesses (1–5 mm). It was shown that sorption capacity increases with increasing film thickness and reaches a maximum value at a thickness of 3 mm. The cleaning efficiency is 99.0%. It has been established that the sorption capacity of the sorption material (SM) depends on the nature of oil products, its viscosity, solubility and initial concentration in water. It is proved that the processes of sorption of oil products proceed by the physical mechanism, which can be represented as the oleophilic interaction of particles of the Sorption material and oil products, which is confirmed by the type of sorption isotherms, which are type II and IV according to the BDT theory and type L according to the Hills classification char- acteristic of polymolecular adsorption. The obtained adsorption isotherms were processed in the framework of the Langmuir and Dubinin – Radushkevich models, and the constants of the adsorption equations were calculated.

Complex Sorption Treatment of Industrial Waste and Production of Plastic Lubricants

Development of new C, S, N-containing plastic lubricants based on products from industrial waste integrated processing

Receiving of New Carbon-Sulfur-Containing Plastic Lubricants Based on Regenerated Products and Used Sorbents

Obtaining effective oil sorbents based on chemical industry waste for water treatment

Conversion of Waste Plastic to Oils for Tribological Applications

Processing of Oil-Tank Sludge by Hydrothermal Dispersion using polycomplexants and Amino-Acid-Salts

Chemical Conversion of Fischer–Tropsch Waxes and Plastic Waste Pyrolysis Condensate to Lubricating Oil and Potential Steam Cracker Feedstocks

Complex Treatment of Industrial Waste Water Containing Non-Ferrous Metals

Enhancing Lubrication Performance of Plastic Oil Lubricant with Oleic Acid-Functionalized Graphene Nanoplatelets and Hexagonal Boron Nitride Solid Lubricant Additives

Analysis of Hazardous Organic Residues from Sodium Hydrosulfite Industry and Utilization As Raw Materials in a Novel Solid Lubricant Production.

Reducing environmental hazards in the elimination of oil spills through the use of sorption materials based on polyurethane foams containing waste from agricultural and polymer industries

Exploring the potential of microbial biomass and microbial extracted oils in tribology: a sustainable frontier for environmentally acceptable lubricants

Polypropylene Plastic Waste Conversion to Lubricants over Ru/TiO 2 Catalysts

Utilization of Spent Detergent Solutions of the Specialized Agricultural Machinery Repair Shop

Technology for producing anticorrosive materials from fat-containing waste

Removal of Nitrate and Phosphate by Chitosan Composited Beads Derived from Crude Oil Refinery Waste: Sorption and Cost-Benefit Analysis

NEW SORBENTS BASED ON INDUSTRIAL WASTE FOR WASTEWATER TREATMENT FROM PETROLEUM PRODUCTS

Sorbent Based on Polyvinyl Butyral and Potassium Polytitanate for Purifying Wastewater from Heavy Metal Ions

Harnessing extremophilic carboxylesterases for applications in polyester depolymerisation and plastic waste recycling

Treatment of residual lubricating oil using rice husk-based material as ecological adsorbent

TECHNOLOGY OF PRODUCTION OF WATERPROOFING MATERIALS BASED ON ASPHALT-RESINOUS-PARAFFIN DEPOSITS AND POLYMERS