Abstract:Purpose As lubricating oils are used, their performance deteriorates and they become contaminated. The purpose of this paper is to investigate the lubrication performance of reclaimed 5 W-30 a fully synthetic used engine oil (UEO) with wear tests after refining it from a solvent-based extraction method using solvent (1-PrOH) and adsorbent materials such as cement, celite and deep eutectic solvent (DES). Design/methodology/approach The treated oil mixtures were prepared by blending engine oils with various adsorbent materials at 5% (w/w) in organic 1-PrOH solvent at a UEO: solvent ratio of 1:2 (w/w). The measurement of kinematic viscosity, density, the total acid number (TAN) and elemental analysis of oil samples was done by the ASTM standards D445/D446, D4052, D974 and D6595, respectively. Adsorbents and treated oil samples characterized by SEM-EDX, FTIR and UV analysis, respectively. Meanwhile, lubricating performance in tribological applications was evaluated through the wear test device using a rotating steel alloy 1.2379 cylinder and a stationary 1.2738 pin under 20, 40 and 80 kg load conditions. Worn surface analysis was done with SEM and 2.5D images. Findings It was found that when using the combination of cement and celite as an adsorbent in the reclamation of used engine oil demonstrated better lubricant properties. The properties of used engine oil were improved in the manner of kinematic viscosity of 32.55 from 68.49 mm 2 /s, VI (Viscosity index) value of 154 from 130, TAN of 3.18 from 4.35 (mgKOH/g) and Fe content of 11 from 32 mg/L. The anti-wear properties of used engine oil improved by at least 32% when 5% cement and 5% celite adsorbent materials were used together. Research limitations/implications The paper is based on findings from a fully synthetic 5 W-30 A5 multi-grade engine lubrication oil collected after driving approximately 12.000 km. Practical implications The results are significant, as they suggest practical regeneration of used engine oil is achievable. Additionally, blending fresh oil with reclaimed used engine oil in a 1:1 ratio reduced wear loss by over 10% compared to fresh oil. Social implications Reusing used engine oils can reduce their environmental impact and bring economic benefits. Originality/value This study showed that the properties of UEO can be enhanced using the solvent extraction-adsorption method. Furthermore, the study provided valuable insights into the metal concentrations in engine oil samples and their impact on lubrication performance. The order of the number of the grooves quantity and the possibility of the observed scuffing region trend relative to the samples was UEO > 5W-30 fresh oil > Treated oil sample with the adsorbent cement and celite together. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2024-0209/

Utilization of Spent Detergent Solutions of the Specialized Agricultural Machinery Repair Shop

Development of new C, S, N-containing plastic lubricants based on products from industrial waste integrated processing

Complex Sorption Treatment of Industrial Waste and Production of Plastic Lubricants

Tribological performance of used engine oil treated with cement and celite adsorbents by solvent extraction-adsorption method

THE USE OF POWDER MATERIALS IN THE TECHNOLOGIES OF RESTORATION AND HARDENING OF AGRICULTURAL MACHINERY PARTS

TRIBOTECHNICAL MATERIALS FOR THE MAINTENANCE OF AGRICULTURAL MACHINERY

Receiving of New Carbon-Sulfur-Containing Plastic Lubricants Based on Regenerated Products and Used Sorbents

Approaches for filtrate utilization from synthetic gypsum production

Resource-Saving Technology of Wastewater Treatment of Factories of Reinforced Concrete

STUDY OF THE METHOD OF DRILLING WASTE WATER TREATMENT FROM MECHANICAL IMPURITIES BY SEDIMENTATION AND FILTRATION

REMOVAL OF CONTAMINATION FROM THE LUBRICATION SYSTEM OF CORN HARVEST ENGINES BEFORE STORAGE

Processing of Oil-Tank Sludge by Hydrothermal Dispersion using polycomplexants and Amino-Acid-Salts

Utilizing Used Cooking Oil and Organic Waste: A Sustainable Approach to Soap Production

Sustainable Reuse of Waste Lubricant Oils: Analysis of Pollutants for the Sustainable Reuse of Waste Lubricant Oils

Utilizing Wheel Washing Machine Sludge as a Cement Substitute in Repair Mortar: An Experimental Investigation into Material Characteristics

The use of liquid fatty waste from restaurants as an alternative raw material for the food industry, biomedical and pharmaceutical applications, and the production of biofuel

Saponins: Natural Surfactants and their Alternative Sustainability in the Formulation of Bio-Based Detergents to Mitigate Environmental Pollution

Analysis of Hazardous Organic Residues from Sodium Hydrosulfite Industry and Utilization As Raw Materials in a Novel Solid Lubricant Production.

Technologies and materials for the renovation of erosion-worn parts of automobile equipment

Sustainable Application of Waste Sludges from the Wastewater Treatment Plant Generated during the Production of Heating Devices in the Construction Industry

Application Status and Prospect of Combined Treatment Technology for Oily Sludge in Domestic Oil Fields