Abstract:The oil Exploration & Production (E&P) industry provides an important energy source for the world. However, there is a worldwide concern about the environmental impacts of E&P activities. Spent drilling fluid is one of the drilling wastes generated by the oil and gas industry’s activities. Drilling fluid and drill cuttings together form the second-largest volume of residues generated by the E&P industry. Drilling fluids are responsible for many important functions in the well drilling process. They are recirculated between the well and the platform several times during the drilling of an oil well. When the drilling reaches the reservoir phase, spent drilling fluid return to the surface contaminated with oil. The resulting residue has several compounds containing potential pollutants, which if incorrectly disposed of can pose several risks to terrestrial, aquatic, and aerial environments, including reducing soil fertility, affecting negatively the flora and fauna and causing health problems due to the volatilization of hazardous oil components such as benzene, toluene, ethylbenzene and xylene into the atmosphere. In this sense, regulators have established that the disposal of non-water based and water-based drilling fluid containing free oil is not allowed above 1% in volume. Therefore, the treatment of oily residues generated in E&P activities is an essential task. Studies around the world presented a variety of physical, chemical, and biological methods to treat drilling waste: bioremediation, thermal, physicochemical, supercritical fluid, electrokinetic and stabilization/solidification treatment. All these methods showed promising results while presenting a series of advantages and limitations. It is also important to note that most treatment methods can recover and/or recycle oil, the main contaminant of the wastes generated. In choosing the best method, some relevant factors need to be considered, such as the drilling waste’s characteristics and the costs to implement the process on a large scale. It was observed that only bioremediation and stabilization/solidification proved to be easy to apply on a large scale. However, the bioremediation treatment process is of long duration, and high biodegradation efficiency is difficult to be achieved in uncontrolled environments. In the stabilization/solidification treatment, in turn, encapsulating all contaminants from the waste is difficult. Therefore, the development of new physicochemical methods for the large-scale treatment of drilling waste have been proposed, as the physicochemical treatment presented the highest treatment efficiency when compared with other methods, while also enabling the recovery and reuse of all separated phases.

STUDY OF THE METHOD OF DRILLING WASTE WATER TREATMENT FROM MECHANICAL IMPURITIES BY SEDIMENTATION AND FILTRATION

Study On Consolidation Behaviors Of Waste Slurry By Using Vacuum Filtration Test

Treatment of drilling fluid waste during oil and gas drilling: a review

A New Approach for Dewatering Slurry: Vacuum Preloaded Geotextile Tube

A new approach for determining compressibility and permeability characteristics of dredged slurries with high water content

Treatment and Reuse of Glass-fiber Wastewater Using Refined Diatomite Physicochemical Treatment and Biological Aerated Filter

DEVELOPMENT OF TECHNOLOGY FOR TREATMENT OF WASTEWATER DIGESTAT FROM THE FOOD INDUSTRY

Environmental impacts related to drilling fluid waste and treatment methods: A critical review

Application of geotextile containers for removal of silt layers of the Krasnodar reservoir

Technologies to improve wellbore cleaning

Prospective systems and technologies for the treatment of wastewater containing oil substances

Research on the Technique of Multistage Functional Filtration to Repair Black and Odorous Water

Modified Rice Husk Waste‐Based Filter for Wastewater Treatment: Pilot Study and Reuse Potential

Study Of Quickly Separating Water From Tunneling Slurry Waste By Combining Vacuum With Electro-Osmosis

Experimental study on environmental chemical effect and purification treatment of waste slurry in horizontal directional drilling

Dewatering characteristics of waste slurry from pipe jacking based on improved vacuum filtration method

THE INFLUENCE OF MANDARIN PEEL POWDER ON FILTRATION PROPERTIES AND TEMPERATURE STABILITY OF WATER-BASED DRILLING MUD

Ecobiotechnology in the process of industrial wastewater treatment of the closed mining enterprise as a guarantee of environment safety

STUDY OF THE ANAEROBIC PROCESS OF INDUSTRIAL WATER PURIFICATION IN COMBINATION WITH SORPTION METHODS

Application of Hollow Fibre Membrane Bioreactor Instead of Granular Activated Carbon Filtration for Treatment of Wastewater from Car Dismantler Activity

Sediment compositions and process optimization in surface gathering system for oilfields