Abstract:In the present paper electroluminescence spectrum and Raman spectrum were used to study electro-degradation of polymer light emitting devices (PLEDs) of PFO-BT15, a new and high-efficiency emitting polymer synthesized by the institute of polymer optoelectronic material & devices (IPOM) in South China University of Technology. The PLEDs with a configuration of ITO glass/PEDOT(120 nm)/PFO-BT15(80 nm)/Ba(4 nm)/Al(200 nm) emitted green light at 550 nm when 5 V dc voltage was applied. Three of those devices were used to study the electro-degradation mechanism of PLEDs. Device A was deposited in vacuum box in dark room to keep sample fresh; Device B was first lighted with current of 1 mA x 0.25 cm(-2) for 200 minutes, then with current of 5 mA x 0.25 cm(-2) for 60 minutes, finally with current of 10 mA x 0.25 cm(-2) for 40 minutes; Device C was lighted with current of 20 mA x 0.25 cm(-2) until the electroluminescence failure. Our experimental results indicate that the degradation speeds highly depend on the current through the devices. The stressed devices show the decrease in electroluminescence efficiency. However, the luminescence spectrum of the stressed device did not change compared with the fresh device, which suggest that the structure of the luminescent polymer did not change with the electro-stress. Raman spectrum was employed to probe the structure changes of the materials used in the device. We found that the PEDOT Raman peak disappeared andthe PFO-BT15 Raman peak still existed in electro-stress device. The results confirmed that it was the breakage of the PEDOT layer instead of degradation of emitting polymer, that led to the final failure of the PLEDs device. This work gives some valuable information for the design and development of highly stable organic light-emitting device.

Photochemical stability of organic electro-optic polymer at 1310-nm wavelength

Photostability of organic electro-optic polymer under practical high intensity continuous-wave 1550 nm laser irradiation

Recent Progress of Electro-optic Polymers for Device Applications

Synthesis of A Photo-Crosslinked Stable Nonlinear Optical Polymer and Application to External Electro-Optic Measurement

Photoablative Etching of Polymers for Integrated Optoelectronic Devices

New Organic thermally stable materials for optoelectronics devices - A linear spectroscopy study

Photodegradation and Thermal Effects in Violet Phosphorus

Photoluminescence Degradation in Organic Light-Emitting Devices

Mechanisms of reversible photodegradation in disperse orange 11 dye doped in PMMA polymer

Stable optical emission from annealed poly (p-phenylene vinylene) derivative films containing oxadiazole

Towards efficient NFA-based selective near-infrared organic photodetectors: impact of thermal annealing of polymer blends

Electro-optic Properties and the Stability of a Cross-linked Second Order Nonlinear Optical Polymer

Observation and Mechanism of Photo-lsomerisation Induced Rapid Photo-Degradation of Optical Nonlinearity in Guest-Host Type Poled Polymer

Recent Development of Crosslinked Nlo Polymers for Large Bandwidth Electro-Optical Modulations

Investigation Of Efficiency And Photostability In Polymer Films

Characterization of electrooptic polymers with high µβ chromophores for photonic device applications

Spectroscopic studies of the mechanism of reversible photodegradation of 1-substituted aminoanthraquinone-doped polymers

[Study on Electro-Degradation of New Conjugated Polymer PFO-BT15 Light Emitting Diodes].

Study on the Degradation of Polymer Light-Emitting Diodes by In-Situ Micro-Raman Spectroscopy

Study on the Degradation of PLEDs by In-Situ Micro-Raman Spectroscopy