Abstract:In the present paper electroluminescence spectrum and Raman spectrum were used to study electro-degradation of polymer light emitting devices (PLEDs) of PFO-BT15, a new and high-efficiency emitting polymer synthesized by the institute of polymer optoelectronic material & devices (IPOM) in South China University of Technology. The PLEDs with a configuration of ITO glass/PEDOT(120 nm)/PFO-BT15(80 nm)/Ba(4 nm)/Al(200 nm) emitted green light at 550 nm when 5 V dc voltage was applied. Three of those devices were used to study the electro-degradation mechanism of PLEDs. Device A was deposited in vacuum box in dark room to keep sample fresh; Device B was first lighted with current of 1 mA x 0.25 cm(-2) for 200 minutes, then with current of 5 mA x 0.25 cm(-2) for 60 minutes, finally with current of 10 mA x 0.25 cm(-2) for 40 minutes; Device C was lighted with current of 20 mA x 0.25 cm(-2) until the electroluminescence failure. Our experimental results indicate that the degradation speeds highly depend on the current through the devices. The stressed devices show the decrease in electroluminescence efficiency. However, the luminescence spectrum of the stressed device did not change compared with the fresh device, which suggest that the structure of the luminescent polymer did not change with the electro-stress. Raman spectrum was employed to probe the structure changes of the materials used in the device. We found that the PEDOT Raman peak disappeared andthe PFO-BT15 Raman peak still existed in electro-stress device. The results confirmed that it was the breakage of the PEDOT layer instead of degradation of emitting polymer, that led to the final failure of the PLEDs device. This work gives some valuable information for the design and development of highly stable organic light-emitting device.

Photostability of organic electro-optic polymer under practical high intensity continuous-wave 1550 nm laser irradiation

Recent Progress of Electro-optic Polymers for Device Applications

Photochemical stability of organic electro-optic polymer at 1310-nm wavelength

Synthesis of A Photo-Crosslinked Stable Nonlinear Optical Polymer and Application to External Electro-Optic Measurement

Thermally resettable laser transmission induced transparency in polymer waveguides at 635 nm

Synthesis and application of a stable nonlinear optical polymer

Recent Development of Crosslinked Nlo Polymers for Large Bandwidth Electro-Optical Modulations

Photoablative Etching of Polymers for Integrated Optoelectronic Devices

Recent Progress in Developing Highly Efficient and Thermally Stable Nonlinear Optical Polymers for Electro-Optics

Characterization of electrooptic polymers with high µβ chromophores for photonic device applications

Electro-optic Properties and the Stability of a Cross-linked Second Order Nonlinear Optical Polymer

New Organic thermally stable materials for optoelectronics devices - A linear spectroscopy study

Highly Reliable Organic Polymer Optical Modulators

[Study on Electro-Degradation of New Conjugated Polymer PFO-BT15 Light Emitting Diodes].

Synthesis and Characterization of the Crosslinkable PMMA and PS Types of Polymers with High Thermal Stability for Nonlinear Optics

Design Strategy for Robust Organic Semiconductor Laser Dyes

Thermosetting Enhancement of the Light-Induced Polar Orientation Stability of Molecules in Polymers

Carbon-bridged oligo(p-phenylenevinylene)s for photostable and broadly tunable, solution-processable thin film organic lasers

Thermal stability of fiber Bragg gratings inscribed in microstructured polymer optical fibers with a single UV laser pulse

Highly Efficient and Photostable Solid-State Dye Lasers Based on Modified Copolymers Doped with Pm567

Photoexcitation Dynamics and Laser Action in Solutions and Films of PPE-PPV Copolymer