Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Research on quasi-two-stage compression cycle characteristics of refrigeration system for cold storage

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Research and Analysis of the New Cycle with Super-Subcooling Single Stage Ammonia Compression Refrigeration System

Upper-limit of Performance Improvement by Using (quasi) Two-Stage Vapor Compression

Optimization research on phase change cold storage module for refrigerated containers

Evaluation of the ejector two-stage compression refrigeration cycle with work performance from energy, conventional exergy and advanced exergy perspectives

A Study On A New Auto-Cascade Refrigerating Cycle

Numerical simulation of CO<sub>2</sub> two-stage compression refrigeration system with external intercooler

Performance Study on Quasi Two-stage Compression Cycle Composed by Different Type of Refrigerant Compressor

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Simulation Study on Single-machine Two-chamber In-parallel Compression Refrigeration/Heat Pump System

Experimental Research on Quasi Two-stage Compression Heat Pump with Flash Tank Vapor-injection Using R134a

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Experimental Investigation on an Auto-Cascade Quasi Two-Stage Compression Heat Pump System

Thermodynamic evaluation of two-stage refrigeration cycle with deep intercooling and series-parallel integration of thermal and mechanical compression

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Experimental Measurement on Characteristics of Cool Storage Air Conditioning System

Experimental investigation on vapor injection defrosting performance of quasi-two-stage compression air source heat pump with flash tank