Abstract:In the present work, layered double hydroxide (MgAl) and alginate composite beads (LDH/alginate) were developed and used as low-cost and environmentally friendly adsorbent for phosphate ions removal. The successful incorporation of sodium alginate into the LDH structure was confirmed through SEM analysis. The dried beads exhibited a notably rough surface, which promotes molecular movement and potentially enhances pollutant adsorption. The pH of zero charge point (pH PZC ) of the composite was found to be 7.41. This result implies that negative ions have a tendency to draw positive charges on the adsorbent surface via electrostatic interaction forces when the pH is lower than the pH PZC . On the other hand, a surface that has a pH higher than pH PZC mostly has a negative charge. The percentage removal and adsorption capacity were investigated as a function of contact time.Experiments were carried out by simultaneously varying three factors, in order to evaluate and compare the predictive capabilities of the response surface methodology (RSM) and the artificial neural network approach (ANN) for the adsorption process. Both methods demonstrated a strong ability to accurately predict the adsorption process. However, the response surface methodology exhibited a lower prediction error compared to the artificial neural network approach.The central composite design within response surface methodology (CCD-RSM) was employed to optimize the experimental conditions for the adsorption process. The model, which considers three factors: adsorbent dose (A), initial concentration (B), and contact time (C), proved to be significant. Among these, the quadratic term (B 2 ) had the most substantial impact on the phosphate ion adsorption rate. The analysis yielded an R 2 value of 0.94, indicating an excellent fit to the data. The findings suggest that increasing contact time and reducing the initial concentration improve phosphate ion removal efficiency, while the adsorbent dose has little to no effect. The Artificial Neural Network (ANN) model effectively predicted the adsorptive remediation of phosphate ions onto LDH/alginate composite beads, achieving a high coefficient of determination (R 2 = 0.984) between the model outputs and the experimental data. The study highlights the significant potential of LDH/alginate composite beads as a natural adsorbent for the removal of phosphate ions from aqueous solutions. These results underscore the environmental friendliness and efficiency of the adsorbent used for phosphate adsorption.

Optimization of the Flotation of Low-Grade Phosphate Ore Using DOE: a Comparative Evaluation of Fatty Acid Formulation to Sodium Oleate

Recovery of Phosphorite from Coarse Particle Magnetic Ore by Flotation

Evaluation and Optimization of Phosphate Recovery from Coarse Rejects Using Reverse Flotation

Enhancing selective calcite and dolomite flotation in the phosphate ores: Investigation, modeling, and automated mineralogy assessment

Enhancing sustainability in phosphate ore processing: Performance of frying oil as alternative flotation collector for carbonate removal

Review of the Main Factors Affecting the Flotation of Phosphate Ores

Phosphate flotation with modified fatty acid

Laboratory Comparison of Dense Medium Separation and Acid Leaching for Preconcentration of Coarse Rejects from Phosphate Washing Plant

Flotation Dephosphorization of High-Phosphorus Oolitic Ore

Synergistic effect of a mixture of ethoxyphosphoric esters and sodium oleate in aqueous solutions

Interaction Features of Sodium Oleate and Oxyethylated Phosphoric Acid Esters with the Apatite Surface

Flotation Separation of Dolomite from Fluorapatite Using Sodium Dodecyl Benzene Sulfonate as the Efficient Collector under Low Temperature

A critical review on natural surfactants and their potential for sustainable mineral flotation

Flotation enhancement of low-grade bauxite using oxalic acid as surface pretreatment agent

Exploiting RSM and ANN modeling methods to optimize phosphate ions removal using LDH/alginate composite beads

Enhanced Flotation Separation of Iron and Silicon with Branched Block Polyethylene Oxide Polypropylene Oxide and Sodium Oleate: Mechanisms and Flotation Behavior

Effect of mixed anionic-nonionic reagents on flotation of diaspore and stability of froth

A New Route to Upgrading the High-Phosphorus Oolitic Hematite Ore by Sodium Magnetization Roasting-Magnetic Separation-Acid and Alkaline Leaching Process

The Effect of Methyl Isobutyl Carbinol “MIBC” on the Froth Stability and Flotation Performance of Low-Grade Phosphate Ore

Selective flotation of calcite and dolomite from apatite using bio-based alternatives to conventional collectors: Castor and mustard oils

Efficient Adsorption of Sodium Oleate from Wastewater with Graphene Oxide/Polyethyleneimine Composite Hydrogel: Performance and Mechanism