Abstract:In the present work, layered double hydroxide (MgAl) and alginate composite beads (LDH/alginate) were developed and used as low-cost and environmentally friendly adsorbent for phosphate ions removal. The successful incorporation of sodium alginate into the LDH structure was confirmed through SEM analysis. The dried beads exhibited a notably rough surface, which promotes molecular movement and potentially enhances pollutant adsorption. The pH of zero charge point (pH PZC ) of the composite was found to be 7.41. This result implies that negative ions have a tendency to draw positive charges on the adsorbent surface via electrostatic interaction forces when the pH is lower than the pH PZC . On the other hand, a surface that has a pH higher than pH PZC mostly has a negative charge. The percentage removal and adsorption capacity were investigated as a function of contact time.Experiments were carried out by simultaneously varying three factors, in order to evaluate and compare the predictive capabilities of the response surface methodology (RSM) and the artificial neural network approach (ANN) for the adsorption process. Both methods demonstrated a strong ability to accurately predict the adsorption process. However, the response surface methodology exhibited a lower prediction error compared to the artificial neural network approach.The central composite design within response surface methodology (CCD-RSM) was employed to optimize the experimental conditions for the adsorption process. The model, which considers three factors: adsorbent dose (A), initial concentration (B), and contact time (C), proved to be significant. Among these, the quadratic term (B 2 ) had the most substantial impact on the phosphate ion adsorption rate. The analysis yielded an R 2 value of 0.94, indicating an excellent fit to the data. The findings suggest that increasing contact time and reducing the initial concentration improve phosphate ion removal efficiency, while the adsorbent dose has little to no effect. The Artificial Neural Network (ANN) model effectively predicted the adsorptive remediation of phosphate ions onto LDH/alginate composite beads, achieving a high coefficient of determination (R 2 = 0.984) between the model outputs and the experimental data. The study highlights the significant potential of LDH/alginate composite beads as a natural adsorbent for the removal of phosphate ions from aqueous solutions. These results underscore the environmental friendliness and efficiency of the adsorbent used for phosphate adsorption.

Exploiting RSM and ANN modeling methods to optimize phosphate ions removal using LDH/alginate composite beads

Removal of phosphate from wastewater using zirconium/iron embedded chitosan/alginate hydrogel beads: An experimental and computational perspective

Preferable Phosphate Sequestration Using Polymer-Supported Mg/Al Layered Double Hydroxide Nanosheets

Removal of phosphate by Donnan dialysis coupled with adsorption onto calcium alginate beads

Network Interior and Surface Engineering of Alginate-Based Beads Using Sorption Affinity Component for Enhanced Phosphate Capture.

Iron-loaded magnetic alginate-chitosan double-gel interpenetrated porous beads for phosphate removal from water: Preparation, adsorption behavior and pH stability

Effective adsorption of phosphate using a Mg–Al–La composite from synthetic/real wastewater: adsorptive behaviour, column tests and economic evaluation

Phosphate removal performances of layered double hydroxides (LDH) embedded polyvinyl alcohol / lanthanum alginate hydrogels

Mg-Al Layered Double Hydroxide Doped Activated Carbon Composites for Phosphate Removal from Synthetic Water: Adsorption and Thermodynamics Studies

Phosphate Removal from Wastewater by Magnetic Amorphous Lanthanum Silicate Alginate Hydrogel Beads

Phosphorus removal and recovery from water with macroporous bead adsorbent constituted of alginate-Zr4+ and PNIPAM-interpenetrated networks

Evaluation of potential adsorbents for simultaneous adsorption of phosphate and ammonium at low concentrations

Application of zirconium modified layered double hydroxide and calcination product for adsorptive removal of phosphate from aqueous solution

Efficient phosphate removal from water by multi-engineered PVA/SA matrix double network hydrogels: Influencing factors and removal mechanism

Magnetic Mg-Fe/LDH Intercalated Activated Carbon Composites for Nitrate and Phosphate Removal from Wastewater: Insight into Behavior and Mechanisms

Sodium Alginate/UiO-66-NH2 Nanocomposite for Phosphate Removal

Phosphate adsorption by amino acids intercalated calcium aluminum hydrotalcites: Kinetic, isothermal and mechanistic studies

Phosphate adsorption on dried alum sludge: Modeling and application to treatment of dairy effluents

Synthesis and characterization of Zn–Al LDHs/activated carbon composite and its adsorption properties for phosphate and nitrate ions in aqueous medium

A stable rare earth-based layered double hydroxide embedded chitosan hydrogel beads for enhanced phosphate removal from aqueous solution: Performance, mechanisms and applicability

Carboxymethyl cellulose/sodium alginate beads incorporated with calcium carbonate nanoparticles and bentonite for phosphate recovery