Abstract:The recovery and recycling of metals that generate toxic ions in the environment is of particular importance, especially when these are tungsten and, in particular, thorium. The radioactive element thorium has unexpectedly accessible domestic applications (filaments of light bulbs and electronic tubes, welding electrodes, and working alloys containing aluminum and magnesium), which lead to its appearance in electrical and electronic waste from municipal waste management platforms. The current paper proposes the simultaneous recovery of waste containing tungsten and thorium from welding electrodes. Simultaneous recovery is achieved by applying a hybrid membrane electrolysis technology coupled with nanofiltration. An electrolysis cell with sulphonated polyether–ether–ketone membranes (sPEEK) and a nanofiltration module with chitosan–polypropylene membranes (C–PHF–M) are used to carry out the hybrid process. The analysis of welding electrodes led to a composition of W (tungsten) 89.4%; Th 7.1%; O2 2.5%; and Al 1.1%. Thus, the parameters of the electrolysis process were chosen according to the speciation of the three metals suggested by the superimposed Pourbaix diagrams. At a constant potential of 20.0 V and an electrolysis current of 1.0 A, the pH is varied and the possible composition of the solution in the anodic workspace is analyzed. Favorable conditions for both electrolysis and nanofiltration were obtained at pH from 6 to 9, when the soluble tungstate ion, the aluminum hydroxide, and solid thorium dioxide were formed. Through the first nanofiltration, the tungstate ion is obtained in the permeate, and thorium dioxide and aluminum hydroxide in the concentrate. By adding a pH 13 solution over the two precipitates, the aluminum is solubilized as sodium aluminate, which will be found after the second nanofiltration in the permeate, with the thorium dioxide remaining integrally (within an error of ±0.1 ppm) on the C–PHF–M membrane.

Thorium Recovery from Choghart Mining Waste by Beneficiation Processes

Toward Efficient and Selective Thorium Recovery Using Stable Ion-Imprinting Sorbent − Application to Processed Acidic Ore Leachate As a Case Study

Evaluation of Chromite Recovery from Shaking Table Tailings by Magnetic Separation Method

Use of extraction chromatography for thorium purification from Eskisehir-Beylikahir Thorium-REEs ore deposit

A sulfonated ligand-aqueous two-phase system for selective extraction of thorium from mining wastewater: Process optimization, structural characterization and mechanism exploration

Biosorption of thorium onto Chlorella Vulgaris microalgae in aqueous media

Iron Recovery from Iron Ore Tailings by Direct Hydrogen Reduction at Low Temperature and Magnetic Separation

Chromium and iron recovery from hazardous extracted vanadium tailings via direct reduction magnetic separation

Evaluation of the potential of recovering various valuable elements from a vanadiferous titanomagnetite tailing based on chemical and process mineralogical characterization

Thorium Removal, Recovery and Recycling: A Membrane Challenge for Urban Mining

Complete recovery of valuable metals from chlorinated titanium-white waste acids: Focus on solvent extraction for recovery and preparation of battery-grade manganese sulfate (MnSO 4 ·H 2 O) from lab to pilot scale

A sustainable strategy for targeted extraction of thorium from radioactive waste leachate based on hydrophobic deep eutectic solvent

An effective and cleaner process to recovery iron, titanium, vanadium, and chromium from Hongge vanadium titanomagnetite with hydrogen-rich gases

Recovery of Scandium, Aluminum, Titanium, and Silicon from Iron-Depleted Bauxite Residue into Valuable Products: A Case Study

Extraction of Thorium from LiCl–KCl Molten Salts by Forming Al–Th Alloys: a New Pyrochemical Method for the Reprocessing of Thorium-Based Spent Fuels

Production of High-Grade Titanium Dioxide Directly from Titanium Ore Using Titanium Scrap and Iron Chloride Waste

Synergistic extraction and separation of thorium from rare earths in chloride media using mixture of Cextrant 230 and Cyanex 923

Thermally assisted magnetic separation and characterization studies of a low-grade hematite ore

Co-recovery of iron, chromium, and vanadium from vanadium tailings by semi-molten reduction–magnetic separation process

Simultaneously Recovery of Thorium and Tungsten through Hybrid Electrolysis–Nanofiltration Processes

Transforming Mining Waste to Wealth: A Novel Process for the Sustainable Recovery and Utilization of Iron Tailings through HCl Leaching and MOFs Absorption