Abstract:The recovery of thorium from aqueous industrial effluents is a challenge not only for environmental purpose but also for the valorization of secondary resources. The complexity of these effluents not only require designing highly efficient stable sorbent with highly reactive functional groups but also with good selectivity. Phosphonic groups are efficient for the binding of thorium. Successive grafting of phosphonic groups through one-pot reaction of vinylphosphonic acid with acrylamide-based reagents (as monomer and crosslinker) for polymerizing an efficient sorbent (HVP/NIP) toward Th(IV) recovery in slightly acidic solution. On the other hand, the selectivity objective was reached by adopting an ion-imprinting strategy (HVP/IP). While the templating weakly improves sorption capacity (at 1.46 mmol g- 1 at pH close to 3), the most significant benefits concern the uptake kinetics (slightly enhanced; equilibrium being reached in 20-25 min) and more significantly the separation properties of HVP/IP, against base metals and uranium (to a certain extent). The selectivity coefficient (i.e., SCTh/ metal) increases twice (against U and Ca) and up to 16-folds against Al, at pH0 3. Fourier-transform infrared and XPS spectroscopy confirm the structural differences for both sorbents (arrangement of reactive groups) and the interactions modes involved in thorium binding mechanisms. The remarkable sorption properties of HVP/IP are also illustrated by the good stability of the sorbent at recycling (loss in sorption less than 2% at the 10th cycle): complete desorption is achieved using 0.3 M HNO3 solution. The ion-imprinted sorbent is successfully applied to the recovery of valuable metals (thorium, uranium, and gallium) from acidic ore leachate at different pH values. The materials are fully characterized using different analytical tools; i.e., FTIR, TGA, XPS, BET, titration, and elemental analysis.

A sustainable strategy for targeted extraction of thorium from radioactive waste leachate based on hydrophobic deep eutectic solvent

Advances in partitioning of minor actinides and rare earths from high level liquid waster

A sulfonated ligand-aqueous two-phase system for selective extraction of thorium from mining wastewater: Process optimization, structural characterization and mechanism exploration

Study on the extraction and separation of precious metals from wastewater using a hydrophobic deep eutectic solvent

An eco-friendly and high-yield extraction of rare earth from the leaching solution of ion adsorbed minerals

Tailored ternary hydrophobic deep eutectic solvents for synergistic separation of yttrium and heavy rare earth elements

Toward Efficient and Selective Thorium Recovery Using Stable Ion-Imprinting Sorbent − Application to Processed Acidic Ore Leachate As a Case Study

Synergistic extraction and separation of thorium from rare earths in chloride media using mixture of Cextrant 230 and Cyanex 923

Investigation on the recovery of thorium and rare earth from radioactive waste residue by functionalized ionic liquids

Selective extraction of thorium to directly form self-assembly solid from HNO3 solution

Highly Efficient Selective Extraction of Mo with Novel Hydrophobic Deep Eutectic Solvents.

Tailoring hydrophobic deep eutectic solvent for selective lithium recovery from dilute aqueous solutions

Selective Liquid-Liquid Extraction of Thorium(IV) from Rare-Earth Element Mixtures

“Super moiety”-phosphoramidate in task-specific ionic liquids for effcient thorium separation through hybrid interaction

Bifunctional hydrophobic deep eutectic solvents for selective recovery of Sm and Co from waste SmCo permanent magnets

Preparation of a novel environmentally friendly hydrophobic deep eutectic solvent ChCl‐THY and its application in removal of hexavalent chromium from aqueous solution

Solvent extraction of thorium(IV) using W/O microemulsion

New Approach for Trace Thallium Removal in High Purity Ammonium Rhenate Solution by P204 Extraction

Deep eutectic solvent‐assisted selective extraction of valuable metals from waste lithium‐ion batteries

Solvent Extraction of Scandium from Leaching Solution of Red Mud Roasted with Ammonium Sulfate Using D2EHPA/TBP

Recovery of Titanium from Ilmenite HCl Leachate Using a Hydrophobic Deep Eutectic Solvent