Abstract:Permanent magnet Vernier motors (PMVMs) possess the advantage of high torque density for high-performance applications. However, the low power factor challenge makes it unacceptable for direct-drive applications. A lack of accurate modeling method based on the motor sizing law, i.e., air-gap flux density, linear current density, and motor geometry parameters, raises difficulties for machine designers to further conduct research on the performance metrics. This article presents a deep investigation into the analytical modeling technique for surface PMVMs (SPMVMs). It can identify an accurate approach to obtain the performance metrics, including electromagnetic torque and power factor. The modeling technique is developed based on the conformal mapping method. By using this, both radial and tangential permeability functions can be calculated to obtain the motor magnetic loading accurately, considering the leakage flux. The slotting effect on both air-gap flux density and armature-winding function is analyzed to achieve a precise formula for torque and power factor computations. The new modeling technique is applied to integral-slot SPMVMs with different slot/pole combinations, gear ratios, slot openings, and magnet thickness to evaluate the impacts of motor parameters on high-power-factor and high-torque-density designs. Finally, an SPMVM with the characteristics of high torque density and power factor is fabricated to verify the analytical model at the power rating of 0.8 kW and the speed of 500 r/min. The experimental results show that the prototype exhibits a high power factor of 0.9 and high torque density 22.5 Nm/L.

Low Pole-Pair Ratio Integration Design of Permanent Magnet Vernier Machine with Improved Power Factor

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Design and Analysis of Novel Modular Stator Axial-Flux Permanent Magnet Vernier Machine With Improved Power Factor

Design of a Chamfered Structure on Consequent-Pole Vernier Permanent-Magnet Machine

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

Comparative Study Between Doubly Salient PM Machine with New Stator/Rotor-Pole Number Combination and Biased Flux PM Machine

Research on the Influence of End Turn Length on Consequent-Pole Vernier Permanent-Magnet Machines

Design Considerations, Analysis and Comparison for High-performance Surface Permanent Magnet Vernier Machines

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Power Factor Analysis in Spoke-Type Permanent Magnet Vernier Motors with Different Slot–Pole Combinations for In-Wheel Direct Drive

Optimization Design of Power Factor for an In-Wheel Vernier PM Machine From the Perspective of Air-Gap Harmonic Modulation

Overview of Permanent Magnet Vernier Machines: Topologies, Key Problems and Applications

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

Deep-investigated Analytical Modeling of a Surface Permanent Magnet Vernier Motor

Comparative Study of Biased Flux PM Machines Having Different Stator Core Segments and Armature Winding Configurations

Design and Research of Novel Consequent-Pole Dual PM Vernier Machines with Spoke and Halbach Array

Research and Optimization of a Novel Flux-Modulated Permanent Magnet Vernier Machine

Investigation of Power Factor Characteristic in Permanent Magnet Motors for In-Wheel Direct Drive Application

Effect of Pole Shaping on Torque Characteristics of Consequent Pole PM Machines

Phase shift investigation of dual-three phase V-shaped PM vernier motor for improving torque and power factor