Abstract:Four different thin-film nanocomposite (TFN) membranes were prepared by adding different concentrations of porous Zr-metal-organic frameworks (MOFs) (UiO-66 and UiO-66-NH2) to piperazine aqueous solution (aqueous phase) or 1,3,5-benzenetricarbonyl trichloride-n-hexane solution (organic phase) by interfacial polymerization. The main purpose is to study the specific effects of different addition methods and addition amounts of nanoparticles on the structure and performance of the TFN membranes by interfacial polymerization. All four TFN membranes exhibited a higher water permeability while maintaining high salt rejection compared to thin-film composite membrane. On the one hand, the TFN membranes behave differently, which are prepared by adding the same kind of nanoparticles to the aqueous phase or organic phase, respectively. The TFN membrane prepared by adding 0.2 w/v% UiO-66 to the organic phase had a high water flux of 87.86 L m–2 h–1, compared to 46.31 L m–2 h–1 of the membrane prepared by adding 0.3 w/v% UiO-66 in the aqueous phase. This is due to the fact that UiO-66 greatly slows the interfacial polymerization rate when UiO-66 is added to the organic phase, resulting in a thinner and wider-aperture polyamide thin-film layer, reducing the water transmission resistance during filtration. Therefore, it is more economical by adding nanoparticles to organic phase than aqueous phase under the same filtering effect. On the other hand, different nanoparticles can also cause differences in performance and structure of the TFN membranes even in the same preparation manner. TFN membrane with UiO-66-NH2 in the aqueous phase has higher water permeance than the one with UiO-66 in the aqueous phase, owing to the good hydrophilicity of the amino group, which improves the water dispersibility of UiO-66-NH2 so that the TFN membrane is more uniform. In addition, UiO-66-NH2 slows down the process of interface polymerization, making the membrane more porous. The monomers in the aqueous phase and organic phase can be adsorbed in the pores of Zr-MOFs, which makes the interfacial polymerization occur both in the pores and on the surface of the pores. Thus, the compatibility between the polyamide and MOFs was enhanced and less defects were formed in the thin-film layer, resulting in a high salt rejection even when the concentration of Zr-MOFs increased. This is the first time to explain that polyamide membrane has not obvious salt rejection attenuation with increasing porous material content using pore adsorption reaction monomer principle. Also, the Zr-MOFs-based TFN membrane exhibited good heat resistance and antifouling property. This work shows that porous Zr-MOFs nanomaterials have significant advantages in the development of nanofiltration membranes with high water flux and rejection.

Forward osmosis membrane doped with water-based zirconium fumarate MOFs to enhance dye pollutant removal and membrane antifouling performance

Porous Metal Organic Framework CuBDC Nanosheet Incorporated Thin-Film Nanocomposite Membrane for High-Performance Forward Osmosis

Metal–Organic Framework Nanosheets for Thin-Film Composite Membranes with Enhanced Permeability and Selectivity

Thin-film nanocomposite membranes incorporated with water stable metal-organic framework CuBTTri for mitigating biofouling

Enhanced water treatment performance of ceramic-based forward osmosis membranes via MOF interlayer

Porous Zr-based metal organic frameworks (Zr-MOFs) incorporated thin film nanocomposite membrane toward enhanced desalination performance.

Sulfonated Zr-Based Metal-Organic Framework Incorporated Thin-Film Composite Membrane for Enhanced Desalination

Elevated Performance of Thin Film Nanocomposite Membranes Enabled by Modified Hydrophilic Mofs for Nanofiltration

Novel Polydopamine/metal Organic Framework Thin Film Nanocomposite Forward Osmosis Membrane for Salt Rejection and Heavy Metal Removal

Synergistic regulation of nanocomposite interlayered forward osmosis membranes with 1D/2D nanostructures for enhanced heavy metal retention

Thin film nanocomposite membrane incorporated with 2D-MOF nanosheets for highly efficient reverse osmosis desalination

Fabrication of novel thin-film composite membrane based on ultrathin metal-organic framework interlayer for enhancing forward osmosis performance

Correction to "porous Zr-Based Metal Organic Frameworks (Zr-Mofs) Incorporated Thin Film Nanocomposite Membrane Toward Enhanced Desalination Performance".

Thin-Film Composite Membrane with Interlayer Decorated Metal–Organic Framework UiO-66 Toward Enhanced Forward Osmosis Performance

MOF-808/Polyamide Thin-Film Nanocomposite Membranes for Efficient Nanofiltration

Fabrication of water-stable MOF-808 membrane for efficient salt/dye separation

Enhanced Water Permeability and Antifouling Property of Coffee-Ring-Textured Polyamide Membranes by in Situ Incorporation of a Zwitterionic Metal-Organic Framework.

Insights into the Impact of Polydopamine Modification on Permeability and Anti-Fouling Performance of Forward Osmosis Membrane.

Zirconium-based mixed ligand metal–organic framework for efficient adsorption of organic dyes

Thin-Film Nanocomposite Membranes Containing Water-Stable Zirconium Metal–Organic Cages for Desalination

Designing heterogeneous MOF-on-MOF membrane with hierarchical pores for effective water treatment