Abstract:Four different thin film nanocomposite (TFN) membranes were prepared by adding different concentrations of porous Zr-MOFs (UiO-66 and UiO-66-NH2) to piperazine (PIP) aqueous solution (aqueous phase) or 1,3,5-Benzenetricarbonyl trichloride (TMC)-n-hexane solution (organic phase) by interfacial polymerization. The main purpose is to study the specific effects of different addition methods and addition amounts of nanoparticles on the structure and performance of the TFN membranes by interfacial polymerization. All four TFN membranes exhibited higher water permeability while maintaining high salt rejection compared to thin film composite (TFC) membrane. On the one hand, the TFN membranes behaves differently which are prepared by adding the same kind of nanoparticles to the aqueous phase or organic phase, respectively. The TFN membrane prepared by adding 0.2 w/v% UiO-66 to the organic phase had high water flux of 87.86 L·m-2·h-1, comparing 46.31 L·m-2·h-1 of membrane prepared by adding 0.3 w/v% UiO-66 in the aqueous phase. This is due to the fact that UiO-66 greatly slows the interfacial polymerization rate when UiO-66 is added to the organic phase, resulting in a thinner and more aperture polyamide thin film layer, reducing the water transmission resistance during filtration. Therefore, it is more economical by adding nanoparticles to organic phase than aqueous phase under the same filtering effect. On the other hand, different nanoparticles can also cause differences in performance and structure of the TFN membranes even in the same preparation manner. TFN membrane with UiO-66-NH2 in the aqueous phase has higher water permeance than the one with UiO-66 in the aqueous phase, owning to good hydrophilicity of amino group, which improves the water dispersibility of UiO-66-NH2, so that the TFN membrane is more uniform. In addition, UiO-66-NH2 slows down the process of interface polymerization, making the membrane more porous. The monomers in aqueous phase and the organic phase can be adsorbed in the pores of Zr-MOFs, which makes the interfacial polymerization occur both in the pores and on the surface of the pores. Thus, the compatibility between the polyamide and MOFs was enhanced and less defects was formed in the thin film layer, resulting in high salt rejection even the concentration of Zr-MOFs increased. This is the first time to explain that polyamide membrane has not obvious salt rejection attenuation with increasing porous material content using pore adsorption reaction monomer principle. Also, the Zr-MOFs based TFN membrane exhibited good heat resistance and anti-fouling property. This work shows that porous Zr-MOFs nanomaterials have significant advantages in the development of nanofiltration membranes with high water flux and rejection.

MOF-808/Polyamide Thin-Film Nanocomposite Membranes for Efficient Nanofiltration

A Novel Thin-Film Nano-Templated Composite Membrane with in Situ Silver Nanoparticles Loading: Separation Performance Enhancement and Implications

Hydrophilic Modified Polydopamine Tailored Heterogeneous Polyamide in Thin-Film Nanocomposite Membranes for Enhanced Separation Performance and Anti-Fouling Properties

Impacts of Metal-Organic Frameworks on Structure and Performance of Polyamide Thin-Film Nanocomposite Membranes.

Polyamide Membranes with Net-Like Nanostructures Induced by Different Charged MOFs for Elevated Nanofiltration

Porous Zr-based metal organic frameworks (Zr-MOFs) incorporated thin film nanocomposite membrane toward enhanced desalination performance.

Custom-tailoring metal-organic framework in thin-film nanocomposite nanofiltration membrane with enhanced internal polarity and amplified surface crosslinking for elevated separation property

Polyamide/UiO-66-NH 2 nanocomposite membranes by polyphenol interfacial engineering for molybdenum(VI) removal

PolyMOF Interlayers Modulated Interfacial Polymerization of Ultra-thin Nanofiltration Membranes with Efficient and Stable Desalination Performance

Polyamide/UiO-66-NH2 Nanocomposite Membranes by Polyphenol Interfacial Engineering for Molybdenum(vi) Removal

Boosted performance of thin-film nanocomposite membranes based on phytic acid functionalized Zr-MOF for nanofiltration

MoS 2@PDA Thin-Film Nanocomposite Nanofiltration Membrane for Simultaneously Improved Permeability and Selectivity

Construction of high performance thin-film nanocomposite nanofiltration membrane by incorporation of hydrophobic MOF-derived nanocages

Nanocomposite Membranes Embedded with Functionalized MoS2 Nanosheets for Enhanced Interfacial Compatibility and Nanofiltration Performance

Construction of thin-film nanocomposite membranes by incorporating acyl chloride@MoS 2 for enhanced nanofiltration performance

Micelles regulated thin film nanocomposite membrane with enhanced nanofiltration performance

Thin film nanocomposite membrane incorporated with 2D-MOF nanosheets for highly efficient reverse osmosis desalination

A Thin-Film Nanocomposite Nanofiltration Membrane Prepared on A Support with in Situ Embedded Zeolite Nanoparticles

High-Performance Thin Film Composite Nanofiltration Membranes with Mos2 Nanosheet Interlayer

A thin film nanocomposite membrane with pre-immobilized UiO-66-NH2 toward enhanced nanofiltration performance

MoS2 @PDA thin-film nanocomposite nanofiltration membrane for simultaneously improved permeability and selectivity