Abstract:Aiming to pipeline dissipative silencers with independent airflow channels and small cross-section size， Belov derived the calculation formula of noise elimination based on sonic catheter theory. This formula was not suitable for arrayed elements dissipative silencers with interconnected airflow channels and large cross-section size. For this reason， this study proposed a calculation method of noise elimination for arrayed elements silencers. The arrayed elements silencer was divided into periodically arranged silencing units and each silencing unit contained a sound-absorbing column. Each silencing unit was simplified as an expanded muffler and a pipeline dissipative silencer respectively and the theoretical values TL 1 and TL 2 of the resistant part （a sudden change of cross-section at inlet and outlet of airflow channel） and the dissipative part of noise elimination were calculated respectively. On this basis， the simulated value TL s of the noise elimination of each arrayed elements silencer was obtained by the finite element method. The octave band correction function for the noise elimination of dissipative part， N f ， was obtained by fitting the values of (TL s -TL 1 )/TL 2 at all 1/1 octave bands. The modified model for calculating the theoretical value of noise elimination was TL t ’=TL 1 +TL 2 ·N f . As an example， the calculation model of noise elimination for arrayed elements dissipative silencers with different structures and sizes was established when the flow resistance of porous sound absorbing material is 11425 （Pa·s）/m 2 . It was testified by actual measurement results that the absolute error between modified theoretical values and measured values of noise elimination at each octave band was less than 3 dB. When the flow resistance of sound absorbing materials differs significantly from the values given in the example， the calculation models of noise elimination should be determined based on the method proposed in this study.

Effects of Source and Load Impedance on the Insertion Loss of Expansion Chamber Hydraulic Noise Suppressors

Experimental analysis of attenuators in hydraulic circuits

Investigations on Pulsation-Reduction Characteristics of Hydraulic Attenuator Based on Experimental Method

Investigation of the Pulsation-Reduction Characteristics of an Expansion Chamber Attenuator in a Hydraulic System

Numerical Study on a Compound Hydraulic Pulsation Attenuator Based on String-Fluid Resonance

Simulation and Improvement of Silencer at Turbocharger Outlet

Impact of Load Impedance on the Performance of a Thermoacoustic System Employing Acoustic Pressure Amplifier

Calculation model of transmission loss for arrayed elements dissipative silencers

A Noise Interference Suppression Method with Optimized Frequency Adjustment for Impedance Measurement

Study On Acoustic Performance Of A Water Muffler For Gear Pump

Experimental study on performance of various mufflers for intermittent exhaust noise reduction

A hybrid time-frequency domain method to predict insertion loss of intake system

An Improved Impedance Measurement Method Based on Multi-Sine Signal Considering the Suppression of Noise Interference

A Time-Domain Simulation Method to Predict Insertion Loss of a Dissipative Muffler with Exhaust Flow

Acoustic Impedance Characteristics of Linear Compressors

Analysis of Intake Silencer Insertion Loss in a Marine Diesel Engine Turbocharger Based on Computational Fluid Dynamics and Acoustic Finite Element Method

Experimental Study on Noise Reduction Effect of a Muffler Inserted in Liquid Transporting Pipeline

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Novel Integrated Control of Fluid Borne Noise in Hydraulic Systems

Sensitivity analysis and noise reduction optimization design of the insert-pipe double expansion chamber muffler

Hydraulic Shock Absorber Orifice Cavitation and Noise Analysis