Abstract:The surface layers of medium-carbon steel AISI 1045 were hardened by laser heat treatment (LHT) and by ultrasonic impact treatment (UIT) applied separately and in different sequences. The advantages of the two latter combined laser-ultrasonic hardening and finishing methods (the LHT + UIT and UIT + LHT combined treatments) are also analyzed in this work. The laser transformation hardening process was implemented using a 1 kW solid-state fiber laser with scanning optics and a proportional integral derivative (PID) closed-loop temperature control. The ultrasonic strain hardening process was carried out by means of a 0.3 kW ultrasonic generator and an ultrasonic oscillatory system, which contained a piezoceramic transducer, step-like horn and the impact head with seven cylindrical pins. The single-path processes were studied. The separately applied LHT and UIT process were firstly analyzed using a response surface method (RSM) and the analysis of variance (ANOVA). The effects of the heating temperature (1050–1300 °C) and the specimen feed rate (40–140 mm/min) used at the LHT process on the features of the hardened zone and surface hardness/microhardness of subsurface layer were assessed. The effects of the vibration amplitude of ultrasonic horn (15–18 μm) and treatment duration (60–240 s) at UIT on the surface roughness/waviness and hardness were also investigated. The experimental plan is based on a miscellaneous design matrix method. The quadratic regression equations for predicting the studied output parameters were developed and the optimum regimes of the LHT and UIT processes were determined based on the highest surface hardness and minimum roughness/waviness. Then, the influences of the combined treatments on the surface topography and hardness were analyzed and compared to those of single LHT and single UIT processes. Results show that the combined treatments provide more than triple increase in the surface hardness in comparison with that of the initial state, as well as formation a regular microrelief with minimum surface roughness.

LASER HARDENING PROCESS ON Ck 45 DEPENDING ON THE LASER PARAMETERS - a small review

Effects of laser heat treatment combined with ultrasonic impact treatment on the surface topography and hardness of carbon steel AISI 1045

Study on Laser Surface Hardening Behavior of 42CrMo Press Brake Die

Effect of laser surface hardening on a low carbon steel substrate wear and hardness

THE MODERN LASER METHODS OF MACHINE AND TOOL PARTS HARDENING ANALYSIS

A Comparative Study of High-Power Diode Laser and CO2 Laser Surface Hardening of AISI 1045 Steel

Influence of the initial structure on the efficiency of laser processing of steel

EVALUATION OF HARDENING EFFICIENCY WITH CONVECTIVE HEAT AND MASS TRANSFER MECHANISM DURING LASER SURFACE ALLOYING IN REFLOW MODE

Study on laser surface hardening process of 30CrMnSiNi2A ultra-high strength steel fabricated by laser deposition manufacturing

Laser Heat Treatment: The State of the Art

Features of Steel Structure Formation in Areas of High-Speed Laser Hardening from Liquid State

Laser Surface Transformation Hardening for Automotive Metals: Recent Progress

Effects of low-power laser hardening on the mechanical and metallurgical properties of biocompatible SAE 420 steel

Surface Hardening of Gears by Laser Beam Processing

Improving the Wear Properties of AISI4130 Steel Using Laser Surface Hardening Treatment

Laser Surface Hardening Of Gun Metal Alloys

Recent Advances in Laser Surface Hardening: Techniques, Modeling Approaches, and Industrial Applications

Development of Hardening Technology for Oil and Gas Pumping and Compressor Equipment Using Laser Hardening

Effect of Process Parameters on the Hardness of Laser Surface Textured 5A06 Aluminum Alloy

Influence of multi-pass laser hardening of normalized AISI 4140 on the grain size

Research of laser transformation hardening on mild steel