Abstract:Bacterial nanocellulose (BNC) is an exopolysaccharide produced by certain acetic acid bacteria. It has high crystallinity, high mechanical strength, high purity and high water-holding capacity. These properties make it useful in making artificial skin (1), electronic paper, composite reinforcement, development of food and cosmetic applications (2). The cost of fermentation media is believed to contribute significantly to the operational costs, especially if synthetic commercial media are used. Hence, much research on BNC production using low-cost substrates has been done focusing on lowering the production costs (3). Also, to meet the requirement for industrial applications, effective large-scale BNC production systems need to be developed, which involves improving the fermentation conditions and identifying high yield BNCproducing strains (4). However, as with many fermentation systems, while promoting the recycling of low value-added products, the use of complex substrates may in fact represent a bottleneck in the BNC fermentation processes. Some of these substrates present, comparatively to synthetic nutrients, high chemical oxygen demand (COD), total and volatile solids (TS and VS), total nitrogen (TN), antimicrobial components (such as phenols) Consequently, these alternative substrates may place an economic problem either downhill, due to the need for wastewaters treatments and/or, uphill, due to the need of substrates pre-treatment. In this work, the optimization of alternative BNC culture medium (Molasses-Corn Steep Liquor, MOL-CSL), using Response surface methodology – central composite design was used to evaluate the effect of inexpensive and widely available nutrients sources, namely MOL, ethanol (EtOH), CSL and ammonium sulphate on BNC production yield under static culture by komagataeibacter xylinus BPR 2001. The optimized parameters for maximum BNC production were: % (m/v): MOL 5.38, CSL 1.91, ammonium sulphate 0.63, disodium phosphate 0.270, citric acid 0.115 and ethanol 1.38 % (v/v). The maximum BNC production yield were 7.5 ± 0.54 g/L versus 1.79 ± 0.04 g/L for MOL-CSL and synthetic medium (HS-EtOH) culture medium, respectively. The resulting wastewater from each culture medium was characterized regarding COD, TN, TS and VS, leading to the conclusion that the wastewaters generated using MOL-CSL are more heavily charged with organic matter, increasing the final costs of BNC production due to the higher costs associated to wastewater treatment. Anaerobic digestion (AD) was studied for wastewater treatment and biogas production from the wastewaters of the BNC fermentation and purification process. Finally, a preliminary Life Cycle Assessment of BNC production was performed and will be presented. Acknowledgements: This study was supported by the Portuguese Foundation for Science and Technology (FCT) (PhD grant SFRH/BD/89547/2012 attributed to Ana Cristina Rodrigues and under the scope of the strategic funding of UID/BIO/04469 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and 4th INTERNATIONAL SYMPOSIUM ON BACTERIAL NANOCELLULOSE 3-4th October, 2019 Almeida Garrett Library Auditorium, Porto-Portugal Multibiorefinery PAC (SAICTPAC/0040/2015) and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020 Programa Operacional Regional do Norte and project no 003435: “BUILD – Bacterial cellulose Leather”, funded by Fundo Europeu de Desenvolvimento Regional (FEDER) through the Programa Operacional do Regional do Norte (NORTE 2020) The authors also acknowledge the financial support of the FCT (ESF) through the grant given to J.V. Oliveira (SFRH/BD/111911/2015).

Purification and Characterization of Bacterial Nanocellulose Produced by Gluconobacter 5AC Isolate from Apple Vinegar

Preparation and Characterization of Nanofibrillated Cellulose from Bamboo Fiber Via Ultrasonication Assisted by Repulsive Effect

Citrate-buffered Yamanaka medium allows to produce high-yield bacterial nanocellulose in static culture using Komagataeibacter strains isolated from apple cider vinegar

Characterization of Bacterial Nanocellulose Produced by Tropical Fruit‐Derived Bacteria in Coconut Water Medium Supplemented with Pineapple Peel Extract

Optimization and physicochemical characterization of bacterial cellulose by Komagataeibacter nataicola and Komagataeibacter maltaceti strains isolated from grape, thorn apple and apple vinegars

Targeting Bacterial Nanocellulose Properties through Tailored Downstream Techniques

Bacterial nanocellulose in papermaking

Effect of addition of γ-poly glutamic acid on bacterial nanocellulose production under agitated culture conditions

Advances in the Production of Sustainable Bacterial Nanocellulose from Banana Leaves

On to the impact of low cost substrates for BNC production

Exploration of a novel and efficient source for production of bacterial nanocellulose, bioprocess optimization and characterization

Bacterial nanocellulose-Robust preparation and application—A literature review

Characterization of hybrid nanofibrils composed of xyloglucan and disintegrated bacterial cellulose

Production with a High Yield of Bacterial Cellulose Nanocrystals by Enzymatic Hydrolysis

Bacterial nanocellulose by static, static intermittent fed-batch and rotary disc bioreactor-based fermentation routes using economical black tea broth medium: A comparative account

Production and Characterization of Nanocellulose from Maguey (Agave cantala) Fiber

Preparation and characterization of bacterial cellulose synthesized by kombucha from vinegar residue

Cellulose nanocrystals isolated from sugarcane bagasse using the formic/peroxyformic acid process: Structural, chemical, and thermal properties

Characterization of cellulose nanocrystals from Zhombwe (Neorautanenia brachypus (harms) CA Sm.) bagasse

Preparation and study of the bacterial nanocellulose properties

Nanocellulose and Cellulose Making with Bio-Enzymes from Different Particle Sizes of Neosinocalamus Affinis