Abstract:Bacterial nanocellulose (BNC) is an exopolysaccharide produced by certain acetic acid bacteria. It has high crystallinity, high mechanical strength, high purity and high water-holding capacity. These properties make it useful in making artificial skin (1), electronic paper, composite reinforcement, development of food and cosmetic applications (2). The cost of fermentation media is believed to contribute significantly to the operational costs, especially if synthetic commercial media are used. Hence, much research on BNC production using low-cost substrates has been done focusing on lowering the production costs (3). Also, to meet the requirement for industrial applications, effective large-scale BNC production systems need to be developed, which involves improving the fermentation conditions and identifying high yield BNCproducing strains (4). However, as with many fermentation systems, while promoting the recycling of low value-added products, the use of complex substrates may in fact represent a bottleneck in the BNC fermentation processes. Some of these substrates present, comparatively to synthetic nutrients, high chemical oxygen demand (COD), total and volatile solids (TS and VS), total nitrogen (TN), antimicrobial components (such as phenols) Consequently, these alternative substrates may place an economic problem either downhill, due to the need for wastewaters treatments and/or, uphill, due to the need of substrates pre-treatment. In this work, the optimization of alternative BNC culture medium (Molasses-Corn Steep Liquor, MOL-CSL), using Response surface methodology – central composite design was used to evaluate the effect of inexpensive and widely available nutrients sources, namely MOL, ethanol (EtOH), CSL and ammonium sulphate on BNC production yield under static culture by komagataeibacter xylinus BPR 2001. The optimized parameters for maximum BNC production were: % (m/v): MOL 5.38, CSL 1.91, ammonium sulphate 0.63, disodium phosphate 0.270, citric acid 0.115 and ethanol 1.38 % (v/v). The maximum BNC production yield were 7.5 ± 0.54 g/L versus 1.79 ± 0.04 g/L for MOL-CSL and synthetic medium (HS-EtOH) culture medium, respectively. The resulting wastewater from each culture medium was characterized regarding COD, TN, TS and VS, leading to the conclusion that the wastewaters generated using MOL-CSL are more heavily charged with organic matter, increasing the final costs of BNC production due to the higher costs associated to wastewater treatment. Anaerobic digestion (AD) was studied for wastewater treatment and biogas production from the wastewaters of the BNC fermentation and purification process. Finally, a preliminary Life Cycle Assessment of BNC production was performed and will be presented. Acknowledgements: This study was supported by the Portuguese Foundation for Science and Technology (FCT) (PhD grant SFRH/BD/89547/2012 attributed to Ana Cristina Rodrigues and under the scope of the strategic funding of UID/BIO/04469 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and 4th INTERNATIONAL SYMPOSIUM ON BACTERIAL NANOCELLULOSE 3-4th October, 2019 Almeida Garrett Library Auditorium, Porto-Portugal Multibiorefinery PAC (SAICTPAC/0040/2015) and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020 Programa Operacional Regional do Norte and project no 003435: “BUILD – Bacterial cellulose Leather”, funded by Fundo Europeu de Desenvolvimento Regional (FEDER) through the Programa Operacional do Regional do Norte (NORTE 2020) The authors also acknowledge the financial support of the FCT (ESF) through the grant given to J.V. Oliveira (SFRH/BD/111911/2015).

Production with a High Yield of Bacterial Cellulose Nanocrystals by Enzymatic Hydrolysis

Production and immobilization of cellobiase from Aspergillus niger ZU-07

Production of nanocellulose by enzymatic hydrolysis: Trends and challenges

Bacterial cellulose nanocrystals obtained through enzymatic and acidic routes: A comparative study of their main properties and in vitro biological responses

Optimising the Production Process of Bacterial Nanocellulose: Impact on Growth and Bioactive Compounds

High Yield Synthesis of Cellulose Nanocrystals From Avicel by Mechano‐Enzymatic Approach

Production of Bacterial Cellulose by Gluconacetobacter hansenii Using Corn Steep Liquor As Nutrient Sources

High yielding, one-step mechano-enzymatic hydrolysis of cellulose to cellulose nanocrystals without bulk solvent

Production of Nanocellulose Using Citric Acid in a Biorefinery Concept: Effect of the Hydrolysis Reaction Time and Techno-Economic Analysis

Preparation and study of the bacterial nanocellulose properties

High-yield and scalable cellulose nanomesh preparation via dilute acid vapor and enzymatic hydrolysis-mediated nanofabrication

Preparation of nanocellulose in high yield via chemi-mechanical synergy

Optimizing the Production of Bacterial Cellulose Nanofibers and Nanocrystals Through Strategic Fiber Pretreatment

Comparing Acid and Enzymatic Hydrolysis Methods for Cellulose Nanocrystals (CNCs) Obtention from Agroindustrial Rice Husk Waste

A novel process for synthesis of spherical nanocellulose by controlled hydrolysis of microcrystalline cellulose using anaerobic microbial consortium

Production of bacterial cellulose and enzyme from waste fiber sludge

A new facile and efficient strategy for high-yield preparation of spherical cellulose nanocrystals via enzymolysis-mechanical synergy

Targeting Bacterial Nanocellulose Properties through Tailored Downstream Techniques

Synthesis and characterization of nanocelluloses isolated through acidic hydrolysis and steam explosion of Gliricidia sepium plant fiber

On to the impact of low cost substrates for BNC production

Sustainable synthesis pathways: Bacterial nanocellulose from lignocellulosic biomass for circular economy initiatives