Abstract:Fiber-reinforced polymer composite (FRP) has always been attracting the attention of researchers due to its multiple applications as a primary material for manufacturing structural elements and parts or as a reinforcing material for the structural elements. Controlling the quality of the additively manufactured FRP is critical to guarantee an FRP material of high performance for different applications. Therefore, in this research, a machine learning model based on data collected from experimental studies was developed using the artificial neural network (ANN) modeling method to control the quality of FRP manufactured by fused deposition modeling (FDM) printing technology. ANN model predicts the tensile properties, particularly ultimate tensile strength (UTS), of the FRP as a function of 7 material and printing parameters, which are fiber tensile strength, polymer tensile strength, layer thickness, fiber volume fraction, fiber form, infill pattern, and fiber orientation. A parametric study was conducted to confirm the credibility of the developed ANN model in representing the pairwise relationship between each input parameter and the predicted UTS. The UTS of the FRP was maximized by optimizing the printing and material parameters by using the artificial bee colony (ABC) algorithm. Several case studies were conducted to prove the efficiency of the coupled ANN model and optimization algorithm. The ANN modeling method and ABC algorithm were codified and applied using MATLAB software. The results showed that the developed ANN model could accurately predict the UTS of FRP. The parametric study confirmed that the developed ANN model was valid for representing the pairwise relationships between the input parameters and the predicted UTS. Also, it was found that the fiber properties, fiber form, fiber orientation, and fiber volume fraction have the highest influence on the UTS of FRP manufactured by FDM compared with other parameters. Furthermore, the ABC optimization algorithm can design the input parameters (i.e., material and printing parameters) to obtain an FRP with maximum UTS. For future studies, it is recommended to include more input parameters, such as printing speed, nozzle temperature, and infill density, in addition to outputs, such as impact and flexural properties.

An innovative fuzzy-inference system for predicting the mechanical behavior of 3D printing thermoset carbon fiber composite materials

Artificial neural network for predicting the mechanical performance of additive manufacturing thermoset carbon fiber composite materials

An Approach for Damage Initiation and Propagation in Metal and Carbon Fiber Hybrid Composites Manufactured by Robotic Fiber Placement

Optimizing the Material and Printing Parameters of the Additively Manufactured Fiber-Reinforced Polymer Composites Using an Artificial Neural Network Model and Artificial Bee Colony Algorithm

Prediction of Deformation and Failure Behavior of Continuous Fiber Reinforced Composite Fabricated by Additive Manufacturing

Autonomous intelligent additive manufacturing of continuous fiber-reinforced composites: data-enhanced knowledgebase and multi-sensor fusion

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

The fabrication of long carbon fiber reinforced polylactic acid composites via fused deposition modelling: Experimental analysis and machine learning

Additive Manufacturing of Composite Polymers: Thermomechanical FEA and Experimental Study

A machine learning approach to characterise fabrication porosity effects on the mechanical properties of additively manufactured thermoplastic composites

Additively Manufactured Carbon-Reinforced ABS Honeycomb Composite Structures and Property Prediction by Machine Learning

Investigation of Fused Filament Fabrication-Based Manufacturing of ABS-Al Composite Structures: Prediction by Machine Learning and Optimization

Online Monitoring and Prediction of Thermo-Mechanics of AFP Based Thermoplastic Composites

Synthesis and Investigation of Mechanical Properties of the Acrylonitrile Butadiene Styrene Fiber Composites Using Fused Deposition Modeling

An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation

A comprehensive methodology to support decision-making for additive manufacturing of short carbon-fiber reinforced polyamide 12 from energy, cost and mechanical perspectives

Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing

Failure mode analysis and prediction model of additively manufactured continuous carbon fiber‐reinforced polylactic acid

Characterisation and Mathematical Modelling of Nonlinear Mechanical Behaviour of 3D Printed Short Carbon Fibre Reinforced Composites

Integrated computational modeling of large format additive manufacturing: Developing a digital twin for material extrusion with carbon fiber-reinforced acrylonitrile butadiene styrene