Abstract:Heat transfer and pressure drop in laminar and turbulent flow have been studied for a long time. However, the thermohydraulic of fluid flow in transition flow is still in the embryonic stage and needs further exploration. Primarily, this article complied all the fragmented research works linked to thermal and flow performance in transition-flow regimes. Several detailed research works pertaining to developing and fully developed transition flow were reported in the past three decades which significantly contribute to the field. It was also found that the transition-flow regime shifted with the change in the operating conditions such as free, forced and mixed convection, developing and fully developed flow, inlet geometries, type of working fluid, channel geometries, roughness, the orientation of test section, etc. Hence, by altering the shape of the entrance, the amount of heat passing through, or the surface of the tube, one could manipulate the range of Reynolds numbers where the transition took place. The temperature of fluids affects their densities, so when heat is applied to the tube wall, it creates temperature differences within the thermal boundary layer. These differences in temperature then cause changes in density and buoyancy due to the force of gravity. Several novel correlations have been developed based on these findings to determine the heat transfer and pressure drop in different flow regimes. In order to develop accurate correlations for heat transfer and pressure drop in the transitional-flow regime, it is necessary to comprehend the factors that impact the beginning and end of this regime. This understanding is crucial for selecting or creating suitable correlations.

Effect of Heat on Velocity and Heat Transfer Coefficient of the Fluid in a Pipe with a Laminar Flow

Friction Factor And Heat Transfer Of Nanofluids Containing Cylindrical Nanoparticles In Laminar Pipe Flow

Fluid Flow and Mixed Convection Heat Transfer in a Rotating Curved Pipe

A critical review on various factors affecting the thermohydraulic performance in transition-flow regime

Direct numerical simulation of turbulent heat transfer in an axially rotating pipe flow

Laminarization of Low Reynolds Number Turbulent Flow in Heated Rotating Pipe

Steady flow of non-Newtonian fluids: Momentum and heat transfer around a rectangular cylinder

Direct Numerical Simulation for Laminarization of Turbulent Forced Gas Flows in Circular Tubes with Strong Heating

Influence of thermophoretic deposition and viscous dissipation on magnetohydrodynamic flow with variable viscosity and thermal conductivity

Entrance and Temperature Dependent Viscosity Effects on Laminar Forced Convection in Straight Ducts With Uniform Wall Heat Flux

A Numerical Solution of Laminar Forced Convection in a Heated Pipe Subjected to a Reciprocating Flow

Newtonian heating effect on laminar flow of Casson fluids: Thermal analysis

A Study on the Effect of Various Fluid, Flow and Mechanical Parameters on the Flow of Newtonian Fluid in an Expanding and Contracting Pipe

Summary and Evaluation on the Heat Transfer Enhancement Techniques of Gas Laminar and Turbulent Pipe Flow

An impact of thermal boundary conditions on characteristics of a non-Newtonian fluid flowing through a sudden pipe contraction

Heat Transfer in a Pipe With Turbulent Flow and Arbitrary Wall-Temperature Distribution

Numerical Study Of Laminar Beat Transfer In Pipe Under Supercritical Pressure

Oscillatory Heat Transfer in a Pipe Subjected to a Laminar Reciprocating Flow

EFFECTS OF VISCOSITY ON EQUATION OF MOTION AND CRITICAL FLOW VELOCITY OF FLUID-CONVEYING PIPE

Delineating impact of viscous dissipation and non-uniform heat source/sink on viscous fluid flow towards a stretching surface

Effect of Heat Transfer on Pipe Flow Stability