Abstract:The accurate computational modelling of momentum and heat transfer in turbulent wall-bounded flow is still a challenging task, especially for fluids with high molecular Prandtl numbers. Due to the steep temperature gradients, the strong variation of fluid properties becomes an additional important issue. The present Direct Numerical Simulation study specially addresses this problem considering a representative working fluid in terms of a real heat transfer oil with temperature-dependent material properties. Near the heated wall, the increase in molecular viscosity significantly attenuates the turbulent convective fluxes of both momentum and heat, despite the markedly increased enthalpy fluctuations. As the thermal conductivity decreases markedly less with temperature than the viscosity, the dampened turbulent mixing significantly reduces the Nusselt number, whereas the skin friction coefficient only marginally differs from the constant fluid property case. The attenuation of the radial velocity fluctuation consistently reduces the production terms in the budgets of the turbulent momentum and heat fluxes, while the production of the enthalpy fluctuations is only shifted away from the wall without significant change in peak level. The also attenuated redistribution in the turbulent axial stress budget reduces the pressure-strain based steering of turbulence towards isotropy. Facing a consequently more anisotropic turbulent motion poses a further difficulty to standard turbulence modelling mostly developed for isotropic turbulence.

Heat Transfer in a Pipe With Turbulent Flow and Arbitrary Wall-Temperature Distribution

Equivalence of Three Thermal Boundary Conditions in Compressible Turbulent Channel Flows

Temperature Distribution in the Entrance Region of a Circular Pipe

Near-Wall Determination of the Turbulent Prandtl Number Based on Experiments, Numerical Simulation and Analytical Models

High Reynolds Number Computation for Turbulent Heat Transfer in a Pipe Flow

A Numerical Solution of Laminar Forced Convection in a Heated Pipe Subjected to a Reciprocating Flow

Modulation of Turbulence Flux Budgets by Varying Fluid Properties in Heated High Prandtl Number Flow

Friction Factor And Heat Transfer Of Nanofluids Containing Cylindrical Nanoparticles In Laminar Pipe Flow

Direct numerical simulation of turbulent heat transfer in an axially rotating pipe flow

Large Eddy Simulation of Turbulent Heat Transfer in Pipe Flows of Temperature Dependent Power-Law Fluids

Direct Numerical Simulation Of Turbulent Heat Transfer In An Axially Rotating Pipe Flow - Reynolds Shear Stress And Scalar Flux Budgets

Fluid Flow and Mixed Convection Heat Transfer in a Rotating Curved Pipe

Oscillatory Heat Transfer in a Pipe Subjected to a Laminar Reciprocating Flow

Comparison of Heat Transfer and Friction in Pipes With Various Internal Roughness

Numerical Analysis of Mixed Convective Heat Transfer In a Square Channel with Uniform Wall Temperature.

Fully Developed Heat Transfer to Fluid Flow in Rectangular Passages Filled With Porous Materials

Transient Multidimensional Analysis of Nonconventional Heat Pipes With Uniform and Nonuniform Heat Distributions

Numerical Prediction of Laminar Flow and Heat Transfer in Wavy Channels of Uniform Cross-Sectional Area

SIMULTANEOUS ESTIMATION OF INLET TEMPERATURE AND WALL HEAT FLUX IN TURBULENT CIRCULAR PIPE FLOW

Analysis of Flow and Heat Transfer in Evaporator Porous Wicking Structure of A Flat Heat Pipe

Sensitivity studies of heat transfer: forced convection across a cylindrical pipe and duct flow