Abstract:This paper presents the results of experimental and numerical investigation of forced convection of gas flows through stainless steel microtubes having inner diameters of 750 mu m, 510 mu m and 170 mu m. The study covers both transitional and turbulent flow regimes (3000<Re<12000). In these regimes the flow is highly compressible, inducing conversion from thermal energy to kinetic energy inside microtubes. Moreover, reverse energy conversion takes place immediately after the fluid is vented to the outlet chamber where the measurement of fluid outlet temperature is performed. In this work the effects of fluid compressibility on the forced convection at microscale is quantitatively discussed by combining experimental data with numerical predictions. It is evidenced that compressibility effects can distinctively enhance convective heat transfer in terms of Nusselt number. This enhancement turns out to be more pronounced for microtubes with smaller inner diameter even at medium Reynolds numbers. In order to explore in-depth the heat transfer mechanism, the system is numerically simulated adopting the Arbitrary-Lagrangian-Eulerian (ALE) method and the Lam-Bremhorst Low-Reynolds number turbulence model to evaluate eddy viscosity coefficient and turbulence energy. The crossing of the numerical data, which provide the local value of pressure and temperature, with the experimental ones helps to explain the physical sense of the experimental results. In addition, the convective heat transfer coefficients obtained in the present work are compared with both classical correlations validated for conventional pipes and the correlations proposed for gas flows through microtubes.

Sensitivity studies of heat transfer: forced convection across a cylindrical pipe and duct flow

Friction and heat transfer in forced air convection with variable physical properties

A Fundamental-Study of the Heat-Transfer and Flow Situation Around Spacers (A Single Row of Several Cylindrical Rods in Cross Flow)

Fluid Flow and Mixed Convection Heat Transfer in a Rotating Curved Pipe

MHD Double-Diffusive Carreau Fluid Flow through a Porous Medium with Variable Thermal Conductivity and Suction/Injection

Numerical Analysis of the Laminar Heat Transfer and Flow Situation Around a Square Rod Spacer in a Flow Passage.

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Heat Transfer in a Pipe With Turbulent Flow and Arbitrary Wall-Temperature Distribution

Unsteady forced convection flow and heat transfer past a blunt headed semicircular cylinder at low Reynolds numbers

Fully Developed Heat Transfer to Fluid Flow in Rectangular Passages Filled With Porous Materials

Analytical modelling of transient conduction heat transfer in tubes for industrial applications

Entrance and Temperature Dependent Viscosity Effects on Laminar Forced Convection in Straight Ducts With Uniform Wall Heat Flux

Parametric Study and Multiple Correlations on Air-Side Heat Transfer and Friction Characteristics of Fin-and-tube Heat Exchangers with Large Number of Large-Diameter Tube Rows

Numerical Investigations of Forced Convection from Rectangular Coiled Pipes

Turbulent Flow in Forced Convection Heat Transfer - Numerical Validation

Numerical Investigation of Heat Transfer Performance of Rectangularly Coiled Pipes

Heat transfer rate of power law fluid flow with variable thermal conductivity through a porous annular sector duct

Sensitivity Analysis of Fluid Properties and Operating Conditions on Flow Distribution in Non-Uniformly Heated Parallel Pipes

Physical modeling of simultaneous heat and mass transfer: species interdiffusion, Soret effect and Dufour effect

Numerical Investigation of Forced Convection from Small Rectangular Coiled Pipes

Transitional And Turbulent Convective Heat Transfer Of Compressible Gas Flows Through Microtubes