Abstract:The hot compression behavior of as-extruded Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy was studied on a Gleeble-3500 thermal simulation machine. Experiments were conducted at temperatures ranging from 523 to 673 K and strain rates ranging from 0.001 to 1 s −1 . Results showed that an increase in the strain rate or a decrease in deformation temperature led to an increase in true stress. The constitutive equation and processing maps of the alloy were obtained and analyzed. The influence of deformation temperatures and strain rates on microstructural evolution and texture was studied with the assistance of electron backscatter diffraction (EBSD). The as-extruded alloy exhibited a bimodal structure that consisted of deformed coarse grains and fine equiaxed recrystallized structures (approximately 1.57 μm). The EBSD results of deformed alloy samples revealed that the recrystallization degree and average grain size increased as the deformation temperature increased. By contrast, dislocation density and texture intensity decreased. Compressive texture weakened with the increase in the deformation temperature at the strain rate of 0.01 s −1 . Most grains with {0001} planes tilted away from the compression direction (CD) gradually. In addition, when the strain rate decreased, the recrystallization degree and average grain size increased. Meanwhile, the dislocation density decreased. Texture appeared to be insensitive to the strain rate. These findings provide valuable insights into the hot compression behavior, microstructural evolution, and texture changes in the Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy, contributing to the understanding of its processing-microstructure-property relationships.

Effect of Ca precipitation on texture development of AZ61 magnesium alloy during high-temperature deformation

Effect of Al Concentration on Basal Texture Formation Behavior of AZ-Series Magnesium Alloys during High-Temperature Deformation

Coupling Thermomechanical Processing and Alloy Design to Improve Textures in Mg-Zn-Ca Sheet Alloys

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Influence of Texture on the Mechanical Properties of a Mg-6Al-1Zn-0.9Sn Alloy Processed by ECAP

Microstructure evolution and mechanical property of Mg-3Al alloys with addition of Ca and Gd during rolling and annealing process

Hot deformation behavior of novel high-strength Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy

Effects and Mechanism of Ca on Refinement of AZ91D Alloy

Multi-microalloying mediated grain growth and texture evolution during the high-temperature static recrystallization of AZ80 alloys

Preferential grain growth and textural evolution of AZ31B Mg alloy during annealing after isothermal compression at 400 °C

Effect of Ca Addition to the Elevated Temperature Mechanical Properties of AZ Series Magnesium Alloys

Recrystallization behavior and texture evolution on extrusion connection process of Mg/Al alloys thickness-oriented bonding sheet

Simultaneous Enhancement of Thermal Conductivity and Mechanical Properties of EZ42 Magnesium Alloy by Ca Microalloying

Effect of CaO on structure and properties of AZ61 magnesium alloy

Effect of annealing treatment on the microstructure and mechanical properties of warm-rolled Mg–Zn–Gd–Ca–Mn alloys

Influence of Deformation Rate on Microstructure, Texture and Mechanical Properties of Indirect-Extruded Mg–Zn–Ca Alloy

Effect of texture evolution on corrosion resistance of AZ80 magnesium alloy subjected to applied force in simulated body fluid

Nanocrystallization and precipitation behavior evolution of AZ80 magnesium alloy during multi-directional compression

Effect of Recrystallization Behavior of AZ31 Magnesium Alloy on Damping Capacity

Thermal Stability of Different Texture Components in Extruded Mg–3Al–1Zn Alloy

Evolution of Deformation Substructure and MgxZnyCaz Metastable Phase in Fine-Grained Mg Alloys